This is the latest recevied telemetry packets stored in our database for station/object CE3SUR-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758177565 | 12 | 729 C | 415 V | 51 M | 0 |
| 1758174563 | 12 | 738 C | 416 V | 52 M | 0 |
| 1758171559 | 12 | 743 C | 415 V | 52 M | 0 |
| 1758168559 | 12 | 752 C | 415 V | 51 M | 0 |
| 1758165559 | 12 | 756 C | 416 V | 51 M | 0 |
| 1758162559 | 12 | 763 C | 415 V | 52 M | 0 |
| 1758159559 | 12 | 770 C | 416 V | 51 M | 0 |
| 1758156830 | 12 | 781 C | 414 V | 52 M | 0 |
| 1758154793 | 12 | 786 C | 415 V | 53 M | 0 |
| 1758151793 | 12 | 800 C | 415 V | 53 M | 0 |
| 1758148793 | 12 | 814 C | 415 V | 52 M | 0 |
| 1758147789 | 12 | 822 C | 414 V | 52 M | 0 |
| 1758146192 | 12 | 822 C | 415 V | 51 M | 0 |
| 1758140191 | 12 | 832 C | 414 V | 53 M | 0 |
| 1758139120 | 12 | 842 C | 414 V | 52 M | 0 |
| 1758138901 | 12 | 840 C | 414 V | 52 M | 0 |
| 1758138739 | 12 | 835 C | 415 V | 52 M | 0 |
| 1758138475 | 12 | 834 C | 414 V | 52 M | 0 |
| 1758138256 | 12 | 828 C | 415 V | 52 M | 0 |
| 1758135761 | 12 | 815 C | 414 V | 51 M | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)