This is the latest recevied telemetry packets stored in our database for station/object DL1MBW-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1770051415 | 5 | 8 C | 3.49 V | 600 M | 0 |
| 1770051185 | 5 | 8 C | 3.49 V | 510 M | 0 |
| 1770051024 | 5 | 7.8 C | 3.49 V | 490 M | 0 |
| 1770050863 | 5 | 7.7 C | 3.49 V | 500 M | 0 |
| 1770050371 | 5 | 7.1 C | 3.5 V | 500 M | 0 |
| 1770049979 | 5 | 6.9 C | 3.53 V | 510 M | 0 |
| 1770048166 | 7 | 9.2 C | 3.57 V | 500 M | 0 |
| 1770048005 | 6 | 9.2 C | 3.58 V | 510 M | 0 |
| 1770047827 | 4 | 9.4 C | 3.6 V | 520 M | 0 |
| 1770047620 | 6 | 9.6 C | 3.56 V | 460 M | 0 |
| 1770047460 | 6 | 9.8 C | 3.59 V | 490 M | 0 |
| 1770047299 | 4 | 9.8 C | 3.59 V | 700 M | 0 |
| 1770046980 | 6 | 10.1 C | 3.61 V | 460 M | 0 |
| 1770046820 | 8 | 10.1 C | 3.61 V | 510 M | 0 |
| 1770046658 | 6 | 10.1 C | 3.61 V | 510 M | 0 |
| 1770046498 | 7 | 9.8 C | 3.61 V | 460 M | 0 |
| 1770046338 | 6 | 9.8 C | 3.62 V | 450 M | 0 |
| 1770045728 | 4 | 10.6 C | 3.61 V | 580 M | 0 |
| 1770045120 | 6 | 11.4 C | 3.64 V | 960 M | 0 |
| 1770044941 | 6 | 11.3 C | 3.66 V | 550 M | 0 |
| 1770044613 | 6 | 11.9 C | 3.66 V | 630 M | 0 |
| 1770044127 | 7 | 11.8 C | 3.66 V | 510 M | 0 |
| 1770043965 | 6 | 11.7 C | 3.68 V | 450 M | 0 |
| 1770043786 | 5 | 11.8 C | 3.69 V | 550 M | 0 |
| 1770043565 | 6 | 11.9 C | 3.69 V | 570 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)