APRS Track Direct

My position About ☰

reset

EA8EE-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA8EE-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*	SAT*
1762515223	32.95 °C	37.3 %RH	828 hPa	4.2 V	6
1762515181	32.93 °C	37.1 %RH	828 hPa	4.2 V	6
1762515147	32.95 °C	37.2 %RH	828 hPa	4.2 V	6
1762515103	32.99 °C	37.1 %RH	828 hPa	4.2 V	6
1762515077	33.02 °C	37 %RH	828 hPa	4.2 V	6
1762515048	33.08 °C	37 %RH	828 hPa	4.2 V	6
1762514746	33.25 °C	37.2 %RH	828 hPa	4.21 V	5
1762514399	33.45 °C	37.4 %RH	828 hPa	4.2 V	6
1762514357	33.47 °C	37.1 %RH	828 hPa	4.2 V	6
1762514299	33.52 °C	37.3 %RH	828 hPa	4.21 V	7
1762514203	33.59 °C	37.4 %RH	828 hPa	4.21 V	6
1762513626	33.84 °C	36.6 %RH	828 hPa	4.21 V	6
1762513593	33.84 °C	36.5 %RH	828 hPa	4.21 V	6
1762513573	33.86 °C	36.6 %RH	828 hPa	4.21 V	6
1762513533	33.84 °C	36.6 %RH	828 hPa	4.21 V	6
1762513507	33.83 °C	36.7 %RH	828 hPa	4.21 V	4
1762513483	33.81 °C	36.7 %RH	828 hPa	4.21 V	7
1762513416	33.77 °C	36.9 %RH	828 hPa	4.21 V	7
1762513408	33.77 °C	36.9 %RH	828 hPa	4.21 V	6
1762513399	33.77 °C	36.9 %RH	828 hPa	4.21 V	6
1762513377	33.75 °C	36.9 %RH	828 hPa	4.21 V	6
1762513366	33.75 °C	36.9 %RH	828 hPa	4.21 V	6
1762513352	33.77 °C	36.8 %RH	828 hPa	4.21 V	6
1762513335	33.77 °C	36.8 %RH	828 hPa	4.21 V	7
1762513326	33.77 °C	36.8 %RH	828 hPa	4.21 V	7

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 0

BAT: 0, 0.01, 0

SAT: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)