APRS Track Direct

My position About ☰

reset

OK0BR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK0BR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1762280591	33.3 Rx Erlang	8.5 Tx Erlang	173 count/10m	369 count/10m	40 count/10m
1762278304	29.7 Rx Erlang	5.3 Tx Erlang	149 count/10m	317 count/10m	25 count/10m
1762277104	29.6 Rx Erlang	6.3 Tx Erlang	148 count/10m	311 count/10m	34 count/10m
1762275904	28.7 Rx Erlang	8 Tx Erlang	144 count/10m	305 count/10m	42 count/10m
1762274705	29.9 Rx Erlang	8 Tx Erlang	156 count/10m	333 count/10m	37 count/10m
1762273504	27 Rx Erlang	8.4 Tx Erlang	146 count/10m	310 count/10m	40 count/10m
1762272304	23.3 Rx Erlang	6.2 Tx Erlang	119 count/10m	270 count/10m	31 count/10m
1762271104	28 Rx Erlang	7.4 Tx Erlang	145 count/10m	303 count/10m	33 count/10m
1762269904	26.3 Rx Erlang	7.5 Tx Erlang	144 count/10m	301 count/10m	38 count/10m
1762268704	32.2 Rx Erlang	9.5 Tx Erlang	161 count/10m	341 count/10m	39 count/10m
1762267504	31.8 Rx Erlang	9 Tx Erlang	153 count/10m	324 count/10m	40 count/10m
1762266304	27.2 Rx Erlang	7.1 Tx Erlang	140 count/10m	293 count/10m	37 count/10m
1762265104	26.7 Rx Erlang	6.8 Tx Erlang	134 count/10m	282 count/10m	34 count/10m
1762263904	26.1 Rx Erlang	6.7 Tx Erlang	142 count/10m	303 count/10m	36 count/10m
1762262704	26.3 Rx Erlang	6.3 Tx Erlang	134 count/10m	282 count/10m	27 count/10m
1762261504	23.9 Rx Erlang	5.5 Tx Erlang	109 count/10m	231 count/10m	23 count/10m
1762260304	24.2 Rx Erlang	5 Tx Erlang	117 count/10m	243 count/10m	26 count/10m
1762259104	23.5 Rx Erlang	6.2 Tx Erlang	115 count/10m	239 count/10m	29 count/10m
1762257904	25 Rx Erlang	5.6 Tx Erlang	113 count/10m	237 count/10m	26 count/10m
1762256704	25 Rx Erlang	5.7 Tx Erlang	119 count/10m	248 count/10m	28 count/10m
1762255504	27.5 Rx Erlang	6.1 Tx Erlang	136 count/10m	282 count/10m	30 count/10m
1762254304	20.4 Rx Erlang	5.3 Tx Erlang	107 count/10m	218 count/10m	25 count/10m
1762253104	26.1 Rx Erlang	5.5 Tx Erlang	127 count/10m	259 count/10m	27 count/10m
1762251904	23.5 Rx Erlang	6 Tx Erlang	119 count/10m	246 count/10m	30 count/10m
1762250704	24 Rx Erlang	4.9 Tx Erlang	108 count/10m	222 count/10m	21 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 1, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)