This is the latest recevied telemetry packets stored in our database for station/object OE5RGM-73. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eCO2* | Temp.out* |
|---|---|---|---|---|---|
| 1778026972 | 0 hPa | 13.3 C deg | 80.3 % | 400 ppm | 11.2 C deg |
| 1778014275 | 0 hPa | 14.2 C deg | 77.1 % | 400 ppm | 11.9 C deg |
| 1778012456 | 0 hPa | 14 C deg | 78.8 % | 400 ppm | 12.1 C deg |
| 1778012300 | 0 hPa | 14.1 C deg | 78.5 % | 400 ppm | 12.1 C deg |
| 1778011291 | 0 hPa | 13.7 C deg | 80.1 % | 400 ppm | 12.1 C deg |
| 1777993153 | 0 hPa | 29 C deg | 24.9 % | 434 ppm | 39.9 C deg |
| 1777989513 | 0 hPa | 26.9 C deg | 25.6 % | 434 ppm | 29.8 C deg |
| 1777980458 | 0 hPa | 26 C deg | 31.5 % | 431 ppm | 33.4 C deg |
| 1777962285 | 0 hPa | 19.8 C deg | 48 % | 419 ppm | 18.5 C deg |
| 1777960480 | 0 hPa | 19.2 C deg | 49.9 % | 426 ppm | 18.6 C deg |
| 1777958636 | 0 hPa | 17.8 C deg | 50.7 % | 433 ppm | 15.1 C deg |
| 1777956844 | 0 hPa | 17.7 C deg | 50.3 % | 440 ppm | 14.8 C deg |
| 1777951395 | 0 hPa | 16.4 C deg | 55 % | 418 ppm | 13.2 C deg |
| 1777944152 | 0 hPa | 17 C deg | 52.2 % | 428 ppm | 13.6 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eCO2: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)