This is the latest recevied telemetry packets stored in our database for station/object DO7BTR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790621496 | 15.6 deg C | 91.7 % | 1022.8 hPa | 0 | 0 |
| 1790620596 | 15.6 deg C | 91.5 % | 1022.9 hPa | 0 | 0 |
| 1790619692 | 15.6 deg C | 91.3 % | 1022.6 hPa | 0 | 0 |
| 1790617888 | 16.2 deg C | 91 % | 1022.3 hPa | 0 | 0 |
| 1790616984 | 16.5 deg C | 90.6 % | 1022.7 hPa | 0 | 0 |
| 1790616084 | 16.5 deg C | 90 % | 1022.3 hPa | 0 | 0 |
| 1790615179 | 16.6 deg C | 89.6 % | 1022 hPa | 0 | 0 |
| 1790614280 | 16.7 deg C | 89.1 % | 1021.5 hPa | 0 | 0 |
| 1790613375 | 16.9 deg C | 87.4 % | 1021.3 hPa | 0 | 0 |
| 1790612475 | 17.9 deg C | 83.6 % | 1021.4 hPa | 0 | 0 |
| 1790610674 | 19.6 deg C | 74.5 % | 1021.1 hPa | 0 | 0 |
| 1790608875 | 21.2 deg C | 68.1 % | 1021 hPa | 0 | 0 |
| 1790607978 | 22.4 deg C | 65.1 % | 1020.8 hPa | 0 | 0 |
| 1790607083 | 23 deg C | 63.5 % | 1020.9 hPa | 0 | 0 |
| 1790606180 | 23.1 deg C | 62.5 % | 1020.8 hPa | 0 | 0 |
| 1790605277 | 24.8 deg C | 59.5 % | 1020.9 hPa | 0 | 0 |
| 1790604371 | 26 deg C | 57.1 % | 1020.9 hPa | 0 | 0 |
| 1790603474 | 26.1 deg C | 56.4 % | 1020.8 hPa | 0 | 0 |
| 1790601673 | 26.2 deg C | 57.6 % | 1020.5 hPa | 0 | 0 |
| 1790600777 | 26.6 deg C | 55.3 % | 1020.5 hPa | 0 | 0 |
| 1790599872 | 27.4 deg C | 52.2 % | 1020.6 hPa | 0 | 0 |
| 1790598971 | 27.9 deg C | 53.3 % | 1020.6 hPa | 0 | 0 |
| 1790598075 | 27.8 deg C | 53.5 % | 1020.6 hPa | 0 | 0 |
| 1790597179 | 28.3 deg C | 52.8 % | 1020.5 hPa | 0 | 0 |
| 1790596274 | 28.5 deg C | 52.5 % | 1020.4 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)