APRS Track Direct

My position About ☰

reset

IZ4UFQ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ4UFQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	Dg1h*	Eff1h*
1836274376	89 Pkt	530 Pkt	27 Pkt	180 Pkt	75 Pcnt
1836274226	86 Pkt	510 Pkt	40 Pkt	190 Pkt	72 Pcnt
1762311805	78 Pkt	540 Pkt	25 Pkt	150 Pkt	72 Pcnt
1762311204	110 Pkt	550 Pkt	25 Pkt	150 Pkt	74 Pcnt
1762310604	93 Pkt	520 Pkt	22 Pkt	160 Pkt	75 Pcnt
1762310003	71 Pkt	530 Pkt	23 Pkt	160 Pkt	76 Pcnt
1762309403	105 Pkt	540 Pkt	30 Pkt	170 Pkt	77 Pcnt
1762308802	90 Pkt	520 Pkt	28 Pkt	180 Pkt	76 Pcnt
1762308201	82 Pkt	510 Pkt	30 Pkt	170 Pkt	76 Pcnt
1762307601	85 Pkt	510 Pkt	31 Pkt	170 Pkt	78 Pcnt
1762307000	98 Pkt	510 Pkt	26 Pkt	160 Pkt	78 Pcnt
1762306400	77 Pkt	500 Pkt	32 Pkt	160 Pkt	79 Pcnt
1762305799	89 Pkt	520 Pkt	32 Pkt	160 Pkt	79 Pcnt
1762305198	83 Pkt	520 Pkt	23 Pkt	160 Pkt	78 Pcnt
1762304598	83 Pkt	540 Pkt	30 Pkt	170 Pkt	78 Pcnt
1762303997	81 Pkt	540 Pkt	19 Pkt	180 Pkt	78 Pcnt
1762303397	92 Pkt	560 Pkt	28 Pkt	200 Pkt	80 Pcnt
1762302796	95 Pkt	550 Pkt	33 Pkt	200 Pkt	81 Pcnt
1762302196	88 Pkt	560 Pkt	32 Pkt	220 Pkt	84 Pcnt
1762301595	97 Pkt	580 Pkt	34 Pkt	230 Pkt	88 Pcnt
1762300994	87 Pkt	570 Pkt	34 Pkt	220 Pkt	91 Pcnt
1762300394	98 Pkt	550 Pkt	40 Pkt	220 Pkt	91 Pcnt
1762299793	84 Pkt	530 Pkt	33 Pkt	200 Pkt	90 Pcnt
1762299193	104 Pkt	540 Pkt	46 Pkt	200 Pkt	90 Pcnt
1762298592	110 Pkt	530 Pkt	40 Pkt	180 Pkt	91 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)