This is the latest recevied telemetry packets stored in our database for station/object DF5RJ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758203229 | 23.2 deg C | 48.5 % | 1021.3 hPa | 0 | 0 |
| 1758202329 | 22.8 deg C | 48.6 % | 1021.4 hPa | 0 | 0 |
| 1758201429 | 22.8 deg C | 49.7 % | 1021.3 hPa | 0 | 0 |
| 1758200529 | 22.5 deg C | 49.6 % | 1021.4 hPa | 0 | 0 |
| 1758199629 | 22.3 deg C | 50.2 % | 1021.5 hPa | 0 | 0 |
| 1758198729 | 21.9 deg C | 52.9 % | 1021.6 hPa | 0 | 0 |
| 1758198399 | 21.6 deg C | 55.1 % | 1021.7 hPa | 0 | 0 |
| 1758197499 | 21.7 deg C | 50.9 % | 1021.8 hPa | 0 | 0 |
| 1758196599 | 21.3 deg C | 51.5 % | 1021.9 hPa | 0 | 0 |
| 1758195699 | 20.9 deg C | 53.1 % | 1022.1 hPa | 0 | 0 |
| 1758194799 | 20.5 deg C | 54.4 % | 1022.2 hPa | 0 | 0 |
| 1758193899 | 20.4 deg C | 54.6 % | 1022.3 hPa | 0 | 0 |
| 1758192999 | 20 deg C | 55.2 % | 1022.4 hPa | 0 | 0 |
| 1758192099 | 19.8 deg C | 57.8 % | 1022.4 hPa | 0 | 0 |
| 1758191198 | 19.3 deg C | 59.5 % | 1022.6 hPa | 0 | 0 |
| 1758190298 | 19 deg C | 59.8 % | 1022.7 hPa | 0 | 0 |
| 1758189398 | 18.9 deg C | 60.2 % | 1022.7 hPa | 0 | 0 |
| 1758188498 | 18.8 deg C | 60.3 % | 1022.8 hPa | 0 | 0 |
| 1758187598 | 18.9 deg C | 60.6 % | 1022.8 hPa | 0 | 0 |
| 1758186698 | 19.2 deg C | 60.3 % | 1022.6 hPa | 0 | 0 |
| 1758186365 | 19.6 deg C | 59.3 % | 1022.6 hPa | 0 | 0 |
| 1758185465 | 20.2 deg C | 57.6 % | 1022.5 hPa | 0 | 0 |
| 1758184565 | 19.9 deg C | 57 % | 1022.7 hPa | 0 | 0 |
| 1758183665 | 20.2 deg C | 57.7 % | 1022.7 hPa | 0 | 0 |
| 1758182765 | 19.9 deg C | 57.4 % | 1022.7 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)