This is the latest recevied telemetry packets stored in our database for station/object VE1NWC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732307706 | 470 | 201 | 0 | 464 | 111 |
| 1732306500 | 471 | 474 | 0 | 465 | 111 |
| 1732303483 | 474 | 545 | 0 | 469 | 111 |
| 1732299871 | 496 | 532 | 0 | 488 | 111 |
| 1732298662 | 489 | 524 | 0 | 482 | 111 |
| 1732297458 | 493 | 529 | 0 | 487 | 110 |
| 1732295644 | 498 | 534 | 0 | 491 | 111 |
| 1732290828 | 482 | 517 | 0 | 475 | 110 |
| 1732289623 | 490 | 530 | 0 | 486 | 110 |
| 1732288418 | 499 | 539 | 0 | 493 | 111 |
| 1732287209 | 482 | 518 | 0 | 477 | 110 |
| 1732286002 | 479 | 515 | 0 | 473 | 110 |
| 1732282988 | 477 | 511 | 0 | 471 | 110 |
| 1732279370 | 471 | 596 | 0 | 468 | 110 |
| 1732275749 | 485 | 242 | 0 | 478 | 110 |
| 1732273945 | 489 | 23 | 0 | 482 | 110 |
| 1732269725 | 466 | 0 | 0 | 460 | 110 |
| 1732267922 | 467 | 0 | 0 | 463 | 110 |
| 1732265511 | 481 | 0 | 0 | 475 | 111 |
| 1732263709 | 482 | 0 | 0 | 477 | 110 |
| 1732261290 | 488 | 0 | 0 | 482 | 111 |
| 1732256472 | 464 | 0 | 0 | 456 | 111 |
| 1732255266 | 467 | 0 | 0 | 461 | 111 |
| 1732253464 | 467 | 0 | 0 | 461 | 110 |
| 1732251652 | 467 | 0 | 0 | 465 | 110 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)