This is the latest recevied telemetry packets stored in our database for station/object SWIDER. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | WiFi* | BaudRate* |
|---|---|---|---|---|---|
| 1790645001 | 0 Pkt | 2 Pkt | 0 Pkt | -64 dB | 9600 bps |
| 1790644401 | 1 Pkt | 2 Pkt | 0 Pkt | -64 dB | 9600 bps |
| 1790643801 | 0 Pkt | 2 Pkt | 0 Pkt | -64 dB | 9600 bps |
| 1790643201 | 1 Pkt | 1 Pkt | 0 Pkt | -64 dB | 9600 bps |
| 1790642601 | 1 Pkt | 1 Pkt | 0 Pkt | -64 dB | 9600 bps |
| 1790642001 | 0 Pkt | 1 Pkt | 0 Pkt | -65 dB | 9600 bps |
| 1790641401 | 0 Pkt | 1 Pkt | 0 Pkt | -66 dB | 9600 bps |
| 1790640801 | 0 Pkt | 2 Pkt | 0 Pkt | -65 dB | 9600 bps |
| 1790640202 | 2 Pkt | 3 Pkt | 0 Pkt | -66 dB | 9600 bps |
| 1790639601 | 4 Pkt | 9 Pkt | 0 Pkt | -66 dB | 9600 bps |
| 1790639001 | 1 Pkt | 8 Pkt | 0 Pkt | -66 dB | 9600 bps |
| 1790638401 | 1 Pkt | 3 Pkt | 0 Pkt | -65 dB | 9600 bps |
| 1790637801 | 3 Pkt | 12 Pkt | 0 Pkt | -64 dB | 9600 bps |
| 1790637201 | 2 Pkt | 7 Pkt | 0 Pkt | -64 dB | 9600 bps |
| 1790636601 | 1 Pkt | 7 Pkt | 0 Pkt | -64 dB | 9600 bps |
| 1790636001 | 1 Pkt | 9 Pkt | 0 Pkt | -65 dB | 9600 bps |
| 1790635401 | 0 Pkt | 6 Pkt | 0 Pkt | -66 dB | 9600 bps |
| 1790634801 | 0 Pkt | 7 Pkt | 0 Pkt | -64 dB | 9600 bps |
| 1790634201 | 0 Pkt | 11 Pkt | 0 Pkt | -63 dB | 9600 bps |
| 1790633601 | 0 Pkt | 7 Pkt | 0 Pkt | -65 dB | 9600 bps |
| 1790633001 | 1 Pkt | 6 Pkt | 0 Pkt | -67 dB | 9600 bps |
| 1790632401 | 0 Pkt | 9 Pkt | 0 Pkt | -70 dB | 9600 bps |
| 1790631801 | 0 Pkt | 8 Pkt | 0 Pkt | -70 dB | 9600 bps |
| 1790631201 | 1 Pkt | 6 Pkt | 0 Pkt | -69 dB | 9600 bps |
| 1790630601 | 0 Pkt | 10 Pkt | 0 Pkt | -69 dB | 9600 bps |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
WiFi: 0, 1, 0
BaudRate: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)