This is the latest recevied telemetry packets stored in our database for station/object OH2TI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | rain* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750127958 | 13.4 V | 22.5 mm | 0 | 0 | 0 |
| 1750127143 | 13.4 V | 22.5 mm | 0 | 0 | 0 |
| 1750126296 | 13.5 V | 22.5 mm | 0 | 0 | 0 |
| 1750125493 | 13.4 V | 22.4 mm | 0 | 0 | 0 |
| 1750124758 | 13.4 V | 22.3 mm | 0 | 0 | 0 |
| 1750123978 | 13.4 V | 22.3 mm | 0 | 0 | 0 |
| 1750123153 | 13.4 V | 22.2 mm | 0 | 0 | 0 |
| 1750122693 | 13.4 V | 22.1 mm | 0 | 0 | 0 |
| 1750122218 | 13.4 V | 22.1 mm | 0 | 0 | 0 |
| 1750121668 | 13.4 V | 22 mm | 0 | 0 | 0 |
| 1750120909 | 13.4 V | 22 mm | 0 | 0 | 0 |
| 1750120288 | 13.3 V | 22 mm | 0 | 0 | 0 |
| 1750119873 | 13.3 V | 22 mm | 0 | 0 | 0 |
| 1750119263 | 13.4 V | 21.7 mm | 0 | 0 | 0 |
| 1750118783 | 13.4 V | 21.7 mm | 0 | 0 | 0 |
| 1750117883 | 13.4 V | 21.7 mm | 0 | 0 | 0 |
| 1750117493 | 13.3 V | 21.6 mm | 0 | 0 | 0 |
| 1750116758 | 13.4 V | 21.5 mm | 0 | 0 | 0 |
| 1750115898 | 13.4 V | 21.4 mm | 0 | 0 | 0 |
| 1750115513 | 13.4 V | 21.3 mm | 0 | 0 | 0 |
| 1750115009 | 13.4 V | 21.2 mm | 0 | 0 | 0 |
| 1750114493 | 13.4 V | 21.2 mm | 0 | 0 | 0 |
| 1750114023 | 13.4 V | 21.2 mm | 0 | 0 | 0 |
| 1750113458 | 13.4 V | 21.2 mm | 0 | 0 | 0 |
| 1750112829 | 13.4 V | 21.2 mm | 0 | 0 | 0 |
*Used Equation Coefficients:
Vin: 0, 0.1, 0
rain: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)