APRS Track Direct

My position About ☰

reset

CALGRY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CALGRY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Dg10m*	Shack*	VDC*	VAC*
1770174445	180 Pkt	11 Pkt	16.5 C	13.3 Volts	101.65 Volts
1770173785	190 Pkt	12 Pkt	17 C	13.3 Volts	114.95 Volts
1770173125	210 Pkt	23 Pkt	16.5 C	13.3 Volts	114.95 Volts
1770172465	200 Pkt	11 Pkt	16.5 C	13.3 Volts	114.95 Volts
1770171805	210 Pkt	11 Pkt	16.5 C	13.3 Volts	114.95 Volts
1770171145	220 Pkt	10 Pkt	16.5 C	11.9 Volts	114 Volts
1770170485	250 Pkt	21 Pkt	16.5 C	13.3 Volts	114.95 Volts
1770169825	230 Pkt	26 Pkt	16.5 C	13.3 Volts	114.95 Volts
1770169165	200 Pkt	13 Pkt	17 C	13.3 Volts	114.95 Volts
1770168505	200 Pkt	15 Pkt	16.5 C	13.3 Volts	101.65 Volts
1770167854	210 Pkt	22 Pkt	16.5 C	13.3 Volts	114.95 Volts
1770167185	190 Pkt	16 Pkt	16.5 C	13.3 Volts	114.95 Volts
1770166525	210 Pkt	8 Pkt	16.5 C	13.3 Volts	114 Volts
1770165865	210 Pkt	19 Pkt	16.5 C	13.3 Volts	114 Volts
1770165205	230 Pkt	10 Pkt	16.5 C	13.3 Volts	114 Volts
1770164545	250 Pkt	15 Pkt	16.5 C	13.3 Volts	114 Volts
1770163885	280 Pkt	20 Pkt	16.5 C	13.3 Volts	114 Volts
1770163225	330 Pkt	14 Pkt	16.5 C	13.3 Volts	114 Volts
1770162565	350 Pkt	16 Pkt	17 C	13.3 Volts	114.95 Volts
1770161905	340 Pkt	12 Pkt	16.5 C	13.3 Volts	114.95 Volts
1770161246	330 Pkt	13 Pkt	17 C	13.3 Volts	115.9 Volts
1770160586	320 Pkt	34 Pkt	17 C	13.3 Volts	115.9 Volts
1770159926	270 Pkt	44 Pkt	17 C	13.3 Volts	115.9 Volts
1770159266	260 Pkt	20 Pkt	17 C	13.3 Volts	115.9 Volts
1770158606	280 Pkt	22 Pkt	17 C	13.3 Volts	102.6 Volts

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

Shack: 0, 0.5, -64

VDC: 0, 0.1, 0

VAC: 0, 0.95, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)