This is the latest recevied telemetry packets stored in our database for station/object ED1ZAD-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RX1h* | DG1h* | Eff1h* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1745141300 | 480 Pkt | 60 Pkt | 84 Pcnt | 0 | 0 |
| 1745140699 | 460 Pkt | 60 Pkt | 84 Pcnt | 0 | 0 |
| 1745140099 | 450 Pkt | 70 Pkt | 85 Pcnt | 0 | 0 |
| 1745139498 | 450 Pkt | 70 Pkt | 86 Pcnt | 0 | 0 |
| 1745138898 | 430 Pkt | 60 Pkt | 85 Pcnt | 0 | 0 |
| 1745138297 | 440 Pkt | 60 Pkt | 85 Pcnt | 0 | 0 |
| 1745137696 | 450 Pkt | 70 Pkt | 87 Pcnt | 0 | 0 |
| 1745137096 | 450 Pkt | 70 Pkt | 87 Pcnt | 0 | 0 |
| 1745136495 | 440 Pkt | 90 Pkt | 85 Pcnt | 0 | 0 |
| 1745135895 | 450 Pkt | 90 Pkt | 85 Pcnt | 0 | 0 |
| 1745135298 | 470 Pkt | 100 Pkt | 85 Pcnt | 0 | 0 |
| 1745134693 | 470 Pkt | 100 Pkt | 86 Pcnt | 0 | 0 |
| 1745134094 | 460 Pkt | 100 Pkt | 87 Pcnt | 0 | 0 |
| 1745133492 | 470 Pkt | 100 Pkt | 86 Pcnt | 0 | 0 |
| 1745132892 | 470 Pkt | 80 Pkt | 86 Pcnt | 0 | 0 |
| 1745132292 | 450 Pkt | 80 Pkt | 85 Pcnt | 0 | 0 |
| 1745131691 | 450 Pkt | 80 Pkt | 85 Pcnt | 0 | 0 |
| 1745131090 | 460 Pkt | 80 Pkt | 84 Pcnt | 0 | 0 |
| 1745130489 | 420 Pkt | 70 Pkt | 84 Pcnt | 0 | 0 |
| 1745129890 | 420 Pkt | 60 Pkt | 84 Pcnt | 0 | 0 |
| 1745129288 | 400 Pkt | 60 Pkt | 83 Pcnt | 0 | 0 |
| 1745128688 | 390 Pkt | 50 Pkt | 84 Pcnt | 0 | 0 |
| 1745128087 | 380 Pkt | 40 Pkt | 84 Pcnt | 0 | 0 |
| 1745127487 | 370 Pkt | 40 Pkt | 85 Pcnt | 0 | 0 |
| 1745126886 | 380 Pkt | 40 Pkt | 84 Pcnt | 0 | 0 |
*Used Equation Coefficients:
RX1h: 0, 10, 0
DG1h: 0, 10, 0
Eff1h: 0, 1, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)