APRS Track Direct

My position About ☰

reset

K0ITP-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K0ITP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1762353316	145 Pkts	132 Pkts	58 Pkts	15 C
1762349716	185 Pkts	166 Pkts	63 Pkts	15 C
1762346117	165 Pkts	141 Pkts	49 Pkts	15 C
1762342515	148 Pkts	130 Pkts	48 Pkts	14 C
1762338915	117 Pkts	109 Pkts	34 Pkts	15 C
1762335315	118 Pkts	102 Pkts	27 Pkts	15 C
1762331715	79 Pkts	64 Pkts	15 Pkts	15 C
1762328115	142 Pkts	119 Pkts	46 Pkts	15 C
1762324516	173 Pkts	148 Pkts	54 Pkts	16 C
1762320916	163 Pkts	138 Pkts	57 Pkts	15 C
1762317316	112 Pkts	92 Pkts	35 Pkts	16 C
1762313717	88 Pkts	73 Pkts	27 Pkts	16 C
1762310117	90 Pkts	79 Pkts	19 Pkts	16 C
1762306517	118 Pkts	96 Pkts	28 Pkts	16 C
1762302916	150 Pkts	118 Pkts	49 Pkts	16 C
1762299316	49 Pkts	44 Pkts	16 Pkts	16 C
1762295716	32 Pkts	32 Pkts	18 Pkts	16 C
1762292116	80 Pkts	72 Pkts	36 Pkts	15 C
1762288516	33 Pkts	31 Pkts	9 Pkts	15 C
1762284916	11 Pkts	11 Pkts	5 Pkts	15 C
1762281316	32 Pkts	31 Pkts	14 Pkts	14 C
1762277716	46 Pkts	42 Pkts	16 Pkts	14 C
1762274116	58 Pkts	53 Pkts	21 Pkts	14 C
1762270516	95 Pkts	87 Pkts	34 Pkts	14 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)