APRS Track Direct

My position About ☰

reset

VA2HQL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA2HQL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	BattLevel*	BattVolt*	BattTemp*	LineVolt*
1790639578	79 %	13.23 Vdc	25.91 degC	123 Vac
1790638677	78 %	13.21 Vdc	26.01 degC	122 Vac
1790637777	77 %	13.19 Vdc	26.08 degC	123 Vac
1790636877	78 %	13.28 Vdc	26.12 degC	123 Vac
1790635976	81 %	13.3 Vdc	26.18 degC	123 Vac
1790635077	83 %	13.29 Vdc	26.22 degC	123 Vac
1790634177	80 %	13.29 Vdc	26.24 degC	123 Vac
1790633277	82 %	13.34 Vdc	26.23 degC	123 Vac
1790632377	84 %	13.31 Vdc	26.25 degC	123 Vac
1790631477	82 %	13.31 Vdc	26.2 degC	123 Vac
1790630594	83 %	13.33 Vdc	26.13 degC	124 Vac
1790629677	82 %	13.31 Vdc	26.1 degC	123 Vac
1790628777	85 %	13.37 Vdc	25.99 degC	123 Vac
1790627877	88 %	13.49 Vdc	25.92 degC	123 Vac
1790626977	99 %	13.74 Vdc	25.7 degC	123 Vac
1790626077	90 %	13.54 Vdc	25.6 degC	123 Vac
1790625177	86 %	13.46 Vdc	25.41 degC	123 Vac
1790624277	97 %	13.72 Vdc	25.15 degC	123 Vac
1790623377	93 %	13.63 Vdc	24.95 degC	123 Vac
1790622477	99 %	13.8 Vdc	24.71 degC	123 Vac
1790621577	100 %	13.87 Vdc	24.48 degC	123 Vac
1790620678	97 %	13.79 Vdc	24.23 degC	123 Vac
1790619777	99 %	13.78 Vdc	24.04 degC	123 Vac
1790618877	100 %	13.83 Vdc	23.7 degC	123 Vac
1790617979	99 %	13.82 Vdc	23.46 degC	123 Vac

*Used Equation Coefficients:

BattLevel: 0, 1, 0

BattVolt: 0, 0.01, 0

BattTemp: 0, 0.01, 0

LineVolt: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)