This is the latest recevied telemetry packets stored in our database for station/object IU0TXS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762264410 | 39 Pkt/10m | 36 Pkt/10m | 4 Volt | 0 | 0 |
| 1762262004 | 46 Pkt/10m | 42 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1762260800 | 50 Pkt/10m | 49 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1762259600 | 31 Pkt/10m | 27 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1762258394 | 25 Pkt/10m | 21 Pkt/10m | 3.96 Volt | 0 | 0 |
| 1762257190 | 32 Pkt/10m | 31 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1762255987 | 34 Pkt/10m | 32 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1762254784 | 20 Pkt/10m | 18 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1762253584 | 25 Pkt/10m | 21 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1762252377 | 30 Pkt/10m | 26 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1762251174 | 37 Pkt/10m | 34 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1762249970 | 27 Pkt/10m | 24 Pkt/10m | 3.96 Volt | 0 | 0 |
| 1762248767 | 18 Pkt/10m | 14 Pkt/10m | 4 Volt | 0 | 0 |
| 1762247564 | 24 Pkt/10m | 20 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1762246360 | 43 Pkt/10m | 41 Pkt/10m | 3.96 Volt | 0 | 0 |
| 1762245160 | 24 Pkt/10m | 23 Pkt/10m | 4 Volt | 0 | 0 |
| 1762243954 | 18 Pkt/10m | 17 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1762242750 | 26 Pkt/10m | 25 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1762241547 | 26 Pkt/10m | 25 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1762240343 | 40 Pkt/10m | 38 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1762239140 | 28 Pkt/10m | 26 Pkt/10m | 3.96 Volt | 0 | 0 |
| 1762237937 | 17 Pkt/10m | 15 Pkt/10m | 4 Volt | 0 | 0 |
| 1762236733 | 23 Pkt/10m | 21 Pkt/10m | 3.98 Volt | 0 | 0 |
| 1762235530 | 27 Pkt/10m | 26 Pkt/10m | 4 Volt | 0 | 0 |
| 1762234566 | 17 Pkt/10m | 15 Pkt/10m | 4 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)