This is the latest recevied telemetry packets stored in our database for station/object WB9TLH-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | PkRec1* | Digi1h* | Eff1h* | Efftot* | Volt* |
|---|---|---|---|---|---|
| 1758188762 | 4.8 Volt | 110 Pkt | 680 Pkt | 67 Pcnt | 14.3 None |
| 1758185162 | 4.35 Volt | 100 Pkt | 680 Pkt | 67 Pcnt | 14.3 None |
| 1758181562 | 4.13 Volt | 110 Pkt | 720 Pkt | 66 Pcnt | 14.3 None |
| 1758177962 | 3.68 Volt | 100 Pkt | 640 Pkt | 66 Pcnt | 14.3 None |
| 1758174363 | 3.45 Volt | 100 Pkt | 740 Pkt | 66 Pcnt | 14.3 None |
| 1758170763 | 3.6 Volt | 100 Pkt | 770 Pkt | 66 Pcnt | 14.3 None |
| 1758167163 | 3.45 Volt | 120 Pkt | 680 Pkt | 66 Pcnt | 13.83 None |
| 1758163563 | 3.08 Volt | 120 Pkt | 720 Pkt | 66 Pcnt | 13.98 None |
| 1758159963 | 2.33 Volt | 100 Pkt | 590 Pkt | 66 Pcnt | 13.98 None |
| 1758156363 | 2.7 Volt | 130 Pkt | 630 Pkt | 66 Pcnt | 13.98 None |
| 1758152763 | 2.33 Volt | 100 Pkt | 640 Pkt | 66 Pcnt | 13.98 None |
| 1758149163 | 2.25 Volt | 100 Pkt | 640 Pkt | 66 Pcnt | 13.98 None |
| 1758145563 | 2.7 Volt | 150 Pkt | 760 Pkt | 66 Pcnt | 13.98 None |
| 1758141964 | 2.18 Volt | 100 Pkt | 690 Pkt | 66 Pcnt | 13.98 None |
| 1758138364 | 1.73 Volt | 80 Pkt | 580 Pkt | 66 Pcnt | 13.98 None |
| 1758134764 | 1.95 Volt | 80 Pkt | 630 Pkt | 66 Pcnt | 13.98 None |
*Used Equation Coefficients:
PkRec1: 0, 0.075, 0
Digi1h: 0, 10, 0
Eff1h: 0, 10, 0
Efftot: 0, 1, 0
Volt: 0, 0.079, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)