This is the latest recevied telemetry packets stored in our database for station/object F6KCI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Temp* | DecEff* | Rx10m* | Rx1h* |
|---|---|---|---|---|---|
| 1786726862 | 14.4 Volt | 43.5 C | 63 Pkt | 3 Pkt | 10 Pkt |
| 1786726562 | 14.4 Volt | 43.5 C | 63 Pkt | 3 Pkt | 10 Pkt |
| 1786726262 | 14.4 Volt | 43.5 C | 63 Pkt | 4 Pkt | 10 Pkt |
| 1786725962 | 14.4 Volt | 43.5 C | 63 Pkt | 2 Pkt | 20 Pkt |
| 1786725662 | 14.4 Volt | 43.5 C | 63 Pkt | 2 Pkt | 20 Pkt |
| 1786725362 | 14.4 Volt | 43.5 C | 63 Pkt | 3 Pkt | 20 Pkt |
| 1786725062 | 14.4 Volt | 43 C | 63 Pkt | 3 Pkt | 30 Pkt |
| 1786724762 | 14.4 Volt | 43 C | 63 Pkt | 3 Pkt | 30 Pkt |
| 1786724462 | 14.4 Volt | 43 C | 63 Pkt | 1 Pkt | 30 Pkt |
| 1786724162 | 14.4 Volt | 42.5 C | 63 Pkt | 0 Pkt | 40 Pkt |
| 1786723862 | 14.4 Volt | 42.5 C | 63 Pkt | 3 Pkt | 50 Pkt |
| 1786723562 | 14.4 Volt | 42.5 C | 63 Pkt | 4 Pkt | 50 Pkt |
| 1786723262 | 14.4 Volt | 42.5 C | 63 Pkt | 5 Pkt | 60 Pkt |
| 1786722962 | 14.4 Volt | 42.5 C | 63 Pkt | 12 Pkt | 80 Pkt |
| 1786680063 | 14.4 Volt | 41.5 C | 63 Pkt | 5 Pkt | 30 Pkt |
| 1786679763 | 14.4 Volt | 41.5 C | 63 Pkt | 5 Pkt | 30 Pkt |
| 1786679463 | 14.4 Volt | 41.5 C | 63 Pkt | 6 Pkt | 30 Pkt |
| 1786679163 | 14.4 Volt | 41.5 C | 63 Pkt | 7 Pkt | 30 Pkt |
| 1786678863 | 14.4 Volt | 41.5 C | 63 Pkt | 7 Pkt | 30 Pkt |
| 1786678563 | 14.4 Volt | 41.5 C | 63 Pkt | 4 Pkt | 20 Pkt |
| 1786678263 | 14.4 Volt | 41.5 C | 63 Pkt | 5 Pkt | 20 Pkt |
| 1786677963 | 14.4 Volt | 41.5 C | 63 Pkt | 6 Pkt | 30 Pkt |
| 1786677663 | 14.4 Volt | 41.5 C | 63 Pkt | 5 Pkt | 20 Pkt |
| 1786677364 | 14.4 Volt | 41.5 C | 63 Pkt | 3 Pkt | 20 Pkt |
| 1786677363 | 14.4 Volt | 41.5 C | 63 Pkt | 3 Pkt | 20 Pkt |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Temp: 0, 0.5, -64
DecEff: 0, 1, 0
Rx10m: 0, 1, 0
Rx1h: 0, 10, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)