This is the latest recevied telemetry packets stored in our database for station/object DO6GZ-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762256489 | 3.89 V | 36 | 0 | 0 | 0 |
| 1762256371 | 3.89 V | 31 | 0 | 0 | 0 |
| 1762256252 | 3.97 V | 32 | 0 | 0 | 0 |
| 1762256015 | 3.98 V | 31 | 0 | 0 | 0 |
| 1762255897 | 3.98 V | 30 | 0 | 0 | 0 |
| 1762255779 | 3.96 V | 22 | 0 | 0 | 0 |
| 1762255660 | 3.97 V | 22 | 0 | 0 | 0 |
| 1762255542 | 3.98 V | 20 | 0 | 0 | 0 |
| 1762255423 | 3.97 V | 24 | 0 | 0 | 0 |
| 1762255305 | 3.98 V | 25 | 0 | 0 | 0 |
| 1762255187 | 3.99 V | 28 | 0 | 0 | 0 |
| 1762255068 | 3.98 V | 27 | 0 | 0 | 0 |
| 1762254950 | 3.98 V | 27 | 0 | 0 | 0 |
| 1762254831 | 3.98 V | 23 | 0 | 0 | 0 |
| 1762254713 | 3.92 V | 24 | 0 | 0 | 0 |
| 1762254595 | 4 V | 22 | 0 | 0 | 0 |
| 1762254353 | 3.88 V | 14 | 0 | 0 | 0 |
| 1762249197 | 4.38 V | 28 | 0 | 0 | 0 |
| 1762249079 | 4.37 V | 25 | 0 | 0 | 0 |
| 1762248959 | 4.37 V | 29 | 0 | 0 | 0 |
| 1762248724 | 4.36 V | 28 | 0 | 0 | 0 |
| 1762248605 | 4.36 V | 24 | 0 | 0 | 0 |
| 1762248012 | 4.34 V | 28 | 0 | 0 | 0 |
| 1762247895 | 4.34 V | 27 | 0 | 0 | 0 |
| 1762247656 | 4.27 V | 29 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0.01
Satellite: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)