This is the latest recevied telemetry packets stored in our database for station/object WA3MEZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RFIn* | RFiGate* | DigiRpt* | Temp* | InetiGate* |
|---|---|---|---|---|---|
| 1758179385 | 293 Pkts | 293 Pkts | 68 Pkts | 37 C | 0 Pkts |
| 1758175785 | 312 Pkts | 311 Pkts | 73 Pkts | 38 C | 0 Pkts |
| 1758172185 | 321 Pkts | 320 Pkts | 79 Pkts | 37 C | 0 Pkts |
| 1758168585 | 271 Pkts | 270 Pkts | 65 Pkts | 38 C | 0 Pkts |
| 1758164985 | 277 Pkts | 277 Pkts | 66 Pkts | 38 C | 0 Pkts |
| 1758161385 | 336 Pkts | 336 Pkts | 105 Pkts | 38 C | 0 Pkts |
| 1758157785 | 262 Pkts | 261 Pkts | 60 Pkts | 38 C | 0 Pkts |
| 1758154185 | 275 Pkts | 275 Pkts | 66 Pkts | 38 C | 0 Pkts |
| 1758150585 | 300 Pkts | 300 Pkts | 83 Pkts | 38 C | 0 Pkts |
| 1758146985 | 329 Pkts | 328 Pkts | 76 Pkts | 37 C | 0 Pkts |
| 1758143385 | 325 Pkts | 325 Pkts | 97 Pkts | 38 C | 0 Pkts |
| 1758139784 | 345 Pkts | 344 Pkts | 107 Pkts | 37 C | 0 Pkts |
| 1758136184 | 332 Pkts | 327 Pkts | 81 Pkts | 37 C | 0 Pkts |
*Used Equation Coefficients:
RFIn: 0, 1, 0
RFiGate: 0, 1, 0
DigiRpt: 0, 1, 0
Temp: 0, 1, 0
InetiGate: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)