This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | CPU* | p-Temp* | alt* | dB* |
|---|---|---|---|---|---|
| 1775930254 | 1206 | 36.5 | 71.6 | 63 | -51 |
| 1775929533 | 1207 | 37 | 71.5 | 69 | -51 |
| 1775929293 | 1207 | 37 | 71.5 | 72 | -51 |
| 1775928814 | 1207 | 36.5 | 71.4 | 74 | -52 |
| 1775928094 | 1206 | 37 | 71.2 | 71 | -52 |
| 1775927493 | 1207 | 36.5 | 71 | 70 | -53 |
| 1775927374 | 1206 | 36.5 | 71 | 68 | -53 |
| 1775926654 | 1207 | 36.5 | 70.8 | 66 | -52 |
| 1775925935 | 1207 | 36.5 | 70.5 | 64 | -52 |
| 1775925693 | 1207 | 36.5 | 70.2 | 64 | -52 |
| 1775925215 | 1207 | 36.5 | 70.1 | 61 | -51 |
| 1775924494 | 1206 | 36.5 | 69.8 | 57 | -51 |
| 1775923893 | 1207 | 35.9 | 69.5 | 58 | -52 |
| 1775923775 | 1206 | 35.9 | 69.4 | 56 | -52 |
| 1775923054 | 1206 | 35.9 | 69.2 | 55 | -53 |
| 1775922334 | 1206 | 35.9 | 69.4 | 55 | -46 |
| 1775922093 | 1207 | 35.4 | 69.4 | 54 | -55 |
| 1775921614 | 1206 | 35.4 | 69.4 | 52 | -57 |
| 1775920894 | 1207 | 35.4 | 69.4 | 49 | -57 |
| 1775920293 | 1207 | 34.9 | 69.4 | 51 | -58 |
| 1775920174 | 1206 | 35.4 | 69.4 | 52 | -59 |
| 1775919454 | 1207 | 35.4 | 69.4 | 54 | -57 |
| 1775918734 | 1207 | 35.4 | 69.5 | 53 | -58 |
| 1775918493 | 1206 | 35.4 | 69.5 | 56 | -59 |
| 1775918014 | 1207 | 35.9 | 69.5 | 56 | -59 |
*Used Equation Coefficients:
DC: 0, 1, 1000
CPU: 0, 0.1, 0
p-Temp: 0, 0.1, 0
alt: 0, 1, -1000
dB: 0, -1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)