This is the latest recevied telemetry packets stored in our database for station/object DB0FS-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274514 | 28.6 deg C | 45.1 % | 1015.4 hPa | 0 | 0 |
| 1774475809 | 23.9 deg C | 30.9 % | 1003.2 hPa | 0 | 0 |
| 1774474909 | 24 deg C | 30.8 % | 1003.1 hPa | 0 | 0 |
| 1774474009 | 24 deg C | 30.9 % | 1003 hPa | 0 | 0 |
| 1774473109 | 24.1 deg C | 30.8 % | 1002.8 hPa | 0 | 0 |
| 1774472209 | 24.1 deg C | 30.8 % | 1002.8 hPa | 0 | 0 |
| 1774471877 | 24.1 deg C | 30.8 % | 1002.8 hPa | 0 | 0 |
| 1774470977 | 24.1 deg C | 30.7 % | 1002.6 hPa | 0 | 0 |
| 1774470077 | 24.2 deg C | 30.6 % | 1002.6 hPa | 0 | 0 |
| 1774469177 | 24.2 deg C | 30.5 % | 1002.5 hPa | 0 | 0 |
| 1774468277 | 24.2 deg C | 30.4 % | 1002.4 hPa | 0 | 0 |
| 1774467377 | 24.2 deg C | 30.4 % | 1002.4 hPa | 0 | 0 |
| 1774466477 | 24.2 deg C | 30.4 % | 1002.3 hPa | 0 | 0 |
| 1774465576 | 24.2 deg C | 30.4 % | 1002.2 hPa | 0 | 0 |
| 1774464676 | 24.2 deg C | 30.4 % | 1002 hPa | 0 | 0 |
| 1774463776 | 24.2 deg C | 30.5 % | 1001.8 hPa | 0 | 0 |
| 1774462876 | 24.2 deg C | 30.4 % | 1001.6 hPa | 0 | 0 |
| 1774461976 | 24.2 deg C | 30.4 % | 1001.4 hPa | 0 | 0 |
| 1774461076 | 24.2 deg C | 30.5 % | 1001.3 hPa | 0 | 0 |
| 1774460176 | 24.3 deg C | 30.6 % | 1000.9 hPa | 0 | 0 |
| 1774459845 | 24.3 deg C | 30.6 % | 1000.9 hPa | 0 | 0 |
| 1774458945 | 24.3 deg C | 30.6 % | 1000.8 hPa | 0 | 0 |
| 1774458045 | 24.4 deg C | 30.6 % | 1000.6 hPa | 0 | 0 |
| 1774457145 | 24.4 deg C | 30.7 % | 1000.3 hPa | 0 | 0 |
| 1774456245 | 24.4 deg C | 30.8 % | 1000 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)