APRS Track Direct

My position About ☰

reset

DB0LEI Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0LEI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274514	13.8 Volt	100 Pkt	20 Pkt	80 Pcnt
1782495356	13.8 Volt	20 Pkt	0 Pkt	80 Pcnt
1782494455	13.8 Volt	20 Pkt	0 Pkt	80 Pcnt
1782493554	13.8 Volt	20 Pkt	0 Pkt	84 Pcnt
1782492653	13.8 Volt	20 Pkt	0 Pkt	68 Pcnt
1782491753	13.8 Volt	20 Pkt	0 Pkt	67 Pcnt
1782490852	13.8 Volt	20 Pkt	0 Pkt	65 Pcnt
1782489951	13.8 Volt	20 Pkt	0 Pkt	63 Pcnt
1782489050	13.8 Volt	20 Pkt	0 Pkt	69 Pcnt
1782488149	13.8 Volt	20 Pkt	0 Pkt	65 Pcnt
1782487248	13.8 Volt	20 Pkt	0 Pkt	70 Pcnt
1782486347	13.8 Volt	20 Pkt	0 Pkt	71 Pcnt
1782485447	13.8 Volt	20 Pkt	0 Pkt	74 Pcnt
1782484546	13.8 Volt	20 Pkt	0 Pkt	79 Pcnt
1782483645	13.8 Volt	20 Pkt	0 Pkt	68 Pcnt
1782482744	13.8 Volt	20 Pkt	0 Pkt	65 Pcnt
1782481843	13.8 Volt	20 Pkt	0 Pkt	70 Pcnt
1782480942	13.8 Volt	40 Pkt	10 Pkt	73 Pcnt
1782480041	13.8 Volt	40 Pkt	10 Pkt	74 Pcnt
1782479140	13.8 Volt	40 Pkt	10 Pkt	75 Pcnt
1782478240	13.8 Volt	40 Pkt	10 Pkt	73 Pcnt
1782477339	13.8 Volt	20 Pkt	0 Pkt	71 Pcnt
1782476438	13.8 Volt	20 Pkt	0 Pkt	76 Pcnt
1782475537	13.8 Volt	20 Pkt	0 Pkt	78 Pcnt
1782474636	13.8 Volt	20 Pkt	0 Pkt	72 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.073, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)