This is the latest recevied telemetry packets stored in our database for station/object PP1GEC-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1751249040 | 185 | 4 | 1 | 76 | 0 |
| 1751247238 | 185 | 4 | 1 | 75 | 0 |
| 1751245437 | 185 | 4 | 1 | 89 | 0 |
| 1751243635 | 185 | 4 | 1 | 92 | 0 |
| 1751241833 | 185 | 4 | 1 | 81 | 0 |
| 1751240032 | 185 | 4 | 1 | 75 | 0 |
| 1751238230 | 185 | 4 | 2 | 72 | 0 |
| 1751236428 | 185 | 4 | 2 | 76 | 0 |
| 1751234626 | 185 | 4 | 1 | 87 | 0 |
| 1751232825 | 185 | 4 | 1 | 91 | 0 |
| 1751231023 | 185 | 4 | 1 | 86 | 0 |
| 1751229221 | 185 | 4 | 1 | 84 | 0 |
| 1751227419 | 185 | 4 | 1 | 82 | 0 |
| 1751225618 | 185 | 5 | 2 | 83 | 0 |
| 1751223816 | 185 | 4 | 2 | 80 | 0 |
| 1751220213 | 185 | 4 | 1 | 80 | 0 |
| 1751218411 | 185 | 4 | 1 | 73 | 0 |
| 1751216609 | 185 | 4 | 1 | 77 | 0 |
| 1751214808 | 185 | 4 | 1 | 82 | 0 |
| 1751213006 | 185 | 4 | 1 | 79 | 0 |
| 1751211204 | 185 | 4 | 1 | 80 | 0 |
| 1751209402 | 185 | 4 | 1 | 78 | 0 |
| 1751207601 | 185 | 4 | 1 | 72 | 0 |
| 1751205799 | 185 | 4 | 1 | 81 | 0 |
| 1751203997 | 185 | 5 | 1 | 80 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)