This is the latest recevied telemetry packets stored in our database for station/object IW1AXR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766270262 | 12.6 Volt | 5.5 GrdC | 0 | 0 | 0 |
| 1766269659 | 12.6 Volt | 5.5 GrdC | 0 | 0 | 0 |
| 1766269054 | 12.6 Volt | 5.5 GrdC | 0 | 0 | 0 |
| 1766268449 | 12.6 Volt | 5.25 GrdC | 0 | 0 | 0 |
| 1766267846 | 12.6 Volt | 5.5 GrdC | 0 | 0 | 0 |
| 1766267239 | 12.6 Volt | 5.5 GrdC | 0 | 0 | 0 |
| 1766266635 | 12.6 Volt | 5.5 GrdC | 0 | 0 | 0 |
| 1766266032 | 12.7 Volt | 5.5 GrdC | 0 | 0 | 0 |
| 1766265428 | 12.7 Volt | 5.5 GrdC | 0 | 0 | 0 |
| 1766264821 | 12.7 Volt | 5.25 GrdC | 0 | 0 | 0 |
| 1766263612 | 12.7 Volt | 5.5 GrdC | 0 | 0 | 0 |
| 1766263007 | 12.7 Volt | 5.5 GrdC | 0 | 0 | 0 |
| 1766261797 | 12.7 Volt | 5.25 GrdC | 0 | 0 | 0 |
| 1766260589 | 12.7 Volt | 5.25 GrdC | 0 | 0 | 0 |
| 1766259983 | 12.7 Volt | 5.25 GrdC | 0 | 0 | 0 |
| 1766258773 | 12.7 Volt | 5.5 GrdC | 0 | 0 | 0 |
| 1766258167 | 12.7 Volt | 5.25 GrdC | 0 | 0 | 0 |
| 1766257564 | 12.7 Volt | 5.25 GrdC | 0 | 0 | 0 |
| 1766256355 | 12.7 Volt | 5.25 GrdC | 0 | 0 | 0 |
| 1766255146 | 12.7 Volt | 5.25 GrdC | 0 | 0 | 0 |
| 1766254541 | 12.7 Volt | 5.25 GrdC | 0 | 0 | 0 |
| 1766253935 | 12.7 Volt | 5.25 GrdC | 0 | 0 | 0 |
| 1766253331 | 12.7 Volt | 5.25 GrdC | 0 | 0 | 0 |
| 1766252726 | 12.7 Volt | 5.25 GrdC | 0 | 0 | 0 |
| 1766252122 | 12.7 Volt | 5.25 GrdC | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.1, 0
Temp: 0, 0.25, -20.5
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)