This is the latest recevied telemetry packets stored in our database for station/object DO0RDG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Vin* | RX* | Eff1h* | A5* |
---|---|---|---|---|---|
1718709559 | 38 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718708659 | 38.5 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718707759 | 38.5 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718706860 | 38.5 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718705960 | 38.5 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718705059 | 39 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718704159 | 39 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718703259 | 39 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718702360 | 39.5 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718701459 | 39.5 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718700559 | 39.5 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718699659 | 39.5 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718698759 | 39.5 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718697859 | 39 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718696959 | 38.5 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718696060 | 38.5 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718695160 | 38 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718694260 | 37.5 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718693360 | 37 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718692460 | 37 C | 13.73 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718691560 | 37 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718690661 | 37 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718689760 | 37 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718688860 | 36.5 C | 13.65 Volt | 0 Pkt | 0 Pcnt | 0 None |
1718687960 | 36.5 C | 13.73 Volt | 0 Pkt | 0 Pcnt | 0 None |
*Used Equation Coefficients:
Temp: 0, 0.5, -64
Vin: 0, 0.075, 0
RX: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)