This is the latest recevied telemetry packets stored in our database for station/object VK2HFG-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | CPU* | Tx* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794916608 | 12.6 Volts | 52 DegC | 41 pkts | 0 | 0 |
| 1794913007 | 12.7 Volts | 53 DegC | 33 pkts | 0 | 0 |
| 1794909407 | 12.7 Volts | 56 DegC | 33 pkts | 0 | 0 |
| 1794905807 | 12.7 Volts | 61 DegC | 44 pkts | 0 | 0 |
| 1794902207 | 13.2 Volts | 67 DegC | 43 pkts | 0 | 0 |
| 1794898608 | 14 Volts | 72 DegC | 37 pkts | 0 | 0 |
| 1794895008 | 14.1 Volts | 74 DegC | 41 pkts | 0 | 0 |
| 1794891407 | 13.3 Volts | 74 DegC | 33 pkts | 0 | 0 |
| 1794887808 | 14.1 Volts | 73 DegC | 24 pkts | 0 | 0 |
| 1794884207 | 14.2 Volts | 70 DegC | 35 pkts | 0 | 0 |
| 1794880608 | 14 Volts | 67 DegC | 20 pkts | 0 | 0 |
| 1794877008 | 13.9 Volts | 63 DegC | 14 pkts | 0 | 0 |
| 1794873408 | 14 Volts | 60 DegC | 21 pkts | 0 | 0 |
| 1794869807 | 13.9 Volts | 57 DegC | 39 pkts | 0 | 0 |
| 1794866208 | 13.2 Volts | 51 DegC | 46 pkts | 0 | 0 |
| 1794862608 | 13 Volts | 48 DegC | 32 pkts | 0 | 0 |
| 1794859008 | 13 Volts | 45 DegC | 19 pkts | 0 | 0 |
| 1794855408 | 12.4 Volts | 45 DegC | 23 pkts | 0 | 0 |
| 1794851807 | 12.4 Volts | 45 DegC | 22 pkts | 0 | 0 |
| 1794848208 | 12.6 Volts | 46 DegC | 23 pkts | 0 | 0 |
| 1794844608 | 12.4 Volts | 47 DegC | 24 pkts | 0 | 0 |
| 1794841007 | 12.6 Volts | 47 DegC | 20 pkts | 0 | 0 |
| 1794837407 | 12.6 Volts | 48 DegC | 26 pkts | 0 | 0 |
| 1794833807 | 12.6 Volts | 49 DegC | 22 pkts | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.1, 0
CPU: 0, 1, 0
Tx: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)