This is the latest recevied telemetry packets stored in our database for station/object LX1US-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1754550853 | 981.2 hPa | 20.6 C deg | 61.8 % | 1027.9 hPa | 0 C deg |
| 1754549053 | 981.3 hPa | 19.7 C deg | 63.7 % | 1028.2 hPa | 0 C deg |
| 1754547253 | 981.1 hPa | 19.8 C deg | 63.7 % | 1028 hPa | 0 C deg |
| 1754545453 | 980.9 hPa | 19.8 C deg | 63.6 % | 1027.7 hPa | 0 C deg |
| 1754543653 | 980.8 hPa | 19.8 C deg | 63.5 % | 1027.6 hPa | 0 C deg |
| 1754541853 | 980.7 hPa | 19.8 C deg | 63.4 % | 1027.5 hPa | 0 C deg |
| 1754540053 | 980.5 hPa | 19.8 C deg | 63.4 % | 1027.3 hPa | 0 C deg |
| 1754538253 | 980.7 hPa | 19.9 C deg | 63.4 % | 1027.6 hPa | 0 C deg |
| 1754536453 | 981 hPa | 19.9 C deg | 63.4 % | 1027.9 hPa | 0 C deg |
| 1754534653 | 981.1 hPa | 19.9 C deg | 63.3 % | 1028 hPa | 0 C deg |
| 1754532853 | 981.3 hPa | 20 C deg | 63.4 % | 1028.2 hPa | 0 C deg |
| 1754531053 | 981.4 hPa | 20 C deg | 63.2 % | 1028.3 hPa | 0 C deg |
| 1754529253 | 981.7 hPa | 20.1 C deg | 63.1 % | 1028.5 hPa | 0 C deg |
| 1754527453 | 981.9 hPa | 20.1 C deg | 62.9 % | 1028.7 hPa | 0 C deg |
| 1754525653 | 982.1 hPa | 20.2 C deg | 62.7 % | 1028.9 hPa | 0 C deg |
| 1754523852 | 982.3 hPa | 20.4 C deg | 62.3 % | 1029.2 hPa | 0 C deg |
| 1754522052 | 982.5 hPa | 21.1 C deg | 60.1 % | 1029.3 hPa | 0 C deg |
| 1754521203 | 982.5 hPa | 22 C deg | 58.9 % | 1029.1 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)