This is the latest recevied telemetry packets stored in our database for station/object KE6YGM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Load* | FreeMem* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274771 | 20 | 0.17 | 82 | 0 | 0 |
| 1836274171 | 20 | 0.21 | 82 | 0 | 0 |
| 1782532654 | 20 | 0.12 | 95 | 0 | 0 |
| 1782532054 | 20 | 0.07 | 96 | 0 | 0 |
| 1782531454 | 20 | 0.09 | 97 | 0 | 0 |
| 1782530853 | 20 | 0.1 | 97 | 0 | 0 |
| 1782530253 | 20 | 0.08 | 98 | 0 | 0 |
| 1782529653 | 20 | 0.03 | 99 | 0 | 0 |
| 1782529053 | 20 | 0.09 | 100 | 0 | 0 |
| 1782528453 | 20 | 0.08 | 100 | 0 | 0 |
| 1782527853 | 20 | 0.09 | 101 | 0 | 0 |
| 1782527253 | 20 | 0.15 | 102 | 0 | 0 |
| 1782526653 | 20 | 0.14 | 102 | 0 | 0 |
| 1782526053 | 20 | 0.13 | 103 | 0 | 0 |
| 1782525453 | 20 | 0.08 | 104 | 0 | 0 |
| 1782524852 | 20 | 0.08 | 105 | 0 | 0 |
| 1782524252 | 20 | 0.12 | 106 | 0 | 0 |
| 1782523652 | 20 | 0.04 | 107 | 0 | 0 |
| 1782522450 | 20 | 0 | 84 | 0 | 0 |
| 1782521850 | 20 | 0.04 | 84 | 0 | 0 |
| 1782521250 | 20 | 0.1 | 84 | 0 | 0 |
| 1782520650 | 20 | 0.04 | 84 | 0 | 0 |
| 1782520050 | 20 | 0.17 | 84 | 0 | 0 |
| 1782519450 | 20 | 0.06 | 84 | 0 | 0 |
| 1782518850 | 20 | 0.15 | 84 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.001, 0
Load: 0, 0.001, 0
FreeMem: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)