APRS Track Direct

My position About ☰

reset

AK6LN-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AK6LN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1762278435	8 Pkts	8 Pkts	2 Pkts	19 C
1762274835	6 Pkts	5 Pkts	3 Pkts	18 C
1762271235	10 Pkts	9 Pkts	2 Pkts	17 C
1762267635	5 Pkts	5 Pkts	1 Pkts	17 C
1762264035	6 Pkts	6 Pkts	0 Pkts	17 C
1762260435	3 Pkts	3 Pkts	2 Pkts	17 C
1762256835	6 Pkts	5 Pkts	1 Pkts	18 C
1762253235	10 Pkts	10 Pkts	2 Pkts	18 C
1762249635	1 Pkts	1 Pkts	1 Pkts	19 C
1762246036	6 Pkts	6 Pkts	2 Pkts	19 C
1762242436	4 Pkts	3 Pkts	3 Pkts	19 C
1762238836	3 Pkts	2 Pkts	0 Pkts	18 C
1762235235	5 Pkts	5 Pkts	2 Pkts	17 C
1762231635	6 Pkts	6 Pkts	5 Pkts	17 C
1762228035	15 Pkts	15 Pkts	11 Pkts	18 C
1762224435	35 Pkts	34 Pkts	14 Pkts	19 C
1762220835	31 Pkts	30 Pkts	21 Pkts	18 C
1762217235	2 Pkts	2 Pkts	1 Pkts	19 C
1762213635	3 Pkts	3 Pkts	2 Pkts	19 C
1762210035	3 Pkts	3 Pkts	2 Pkts	19 C
1762206435	5 Pkts	5 Pkts	1 Pkts	19 C
1762202835	6 Pkts	5 Pkts	3 Pkts	19 C
1762199235	7 Pkts	7 Pkts	2 Pkts	19 C
1762195635	9 Pkts	9 Pkts	1 Pkts	18 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)