APRS Track Direct

My position About ☰

reset

E27ASY-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E27ASY-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1836274621	0 Pkt	0 Pkt	-50 dBm	0.06 V
1762241085	0 Pkt	0 Pkt	-50 dBm	0.08 V
1762239861	0 Pkt	0 Pkt	-50 dBm	0.21 V
1762238636	0 Pkt	0 Pkt	-52 dBm	0.08 V
1762237412	0 Pkt	0 Pkt	-48 dBm	0.08 V
1762236187	0 Pkt	0 Pkt	-50 dBm	0.08 V
1762234967	0 Pkt	0 Pkt	-50 dBm	0.08 V
1762233738	0 Pkt	0 Pkt	-53 dBm	0.08 V
1762232514	0 Pkt	0 Pkt	-48 dBm	0.08 V
1762231289	0 Pkt	0 Pkt	-51 dBm	0.08 V
1762230065	0 Pkt	0 Pkt	-51 dBm	0.08 V
1762228840	0 Pkt	0 Pkt	-54 dBm	0.08 V
1762227616	0 Pkt	0 Pkt	-52 dBm	0.08 V
1762226392	0 Pkt	0 Pkt	-60 dBm	0.08 V
1762225167	0 Pkt	0 Pkt	-49 dBm	0.08 V
1762223943	0 Pkt	0 Pkt	-50 dBm	0.08 V
1762222718	0 Pkt	0 Pkt	-49 dBm	0.08 V
1762221494	0 Pkt	0 Pkt	-50 dBm	0.08 V
1762220269	0 Pkt	0 Pkt	-46 dBm	0.08 V
1762219045	0 Pkt	1 Pkt	-50 dBm	0.08 V
1762217820	0 Pkt	2 Pkt	-48 dBm	0.08 V
1762216595	11 Pkt	0 Pkt	-50 dBm	0.08 V
1762215196	4 Pkt	0 Pkt	-48 dBm	0.08 V
1762213908	0 Pkt	0 Pkt	-53 dBm	0.08 V
1762212683	0 Pkt	0 Pkt	-48 dBm	0.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)