This is the latest recevied telemetry packets stored in our database for station/object WA2GUG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786720166 | 157 | 1 | 8 | 10 | 110 |
| 1786718966 | 157 | 1 | 8 | 11 | 110 |
| 1786717766 | 157 | 1 | 8 | 11 | 110 |
| 1786716566 | 157 | 1 | 8 | 10 | 110 |
| 1786715366 | 157 | 1 | 8 | 11 | 110 |
| 1786714166 | 157 | 1 | 8 | 11 | 110 |
| 1786712966 | 156 | 1 | 8 | 10 | 110 |
| 1786711766 | 157 | 1 | 8 | 11 | 110 |
| 1786710566 | 157 | 1 | 8 | 11 | 110 |
| 1786709366 | 157 | 1 | 8 | 10 | 110 |
| 1786708165 | 156 | 1 | 8 | 11 | 110 |
| 1786706965 | 157 | 1 | 8 | 11 | 110 |
| 1786705765 | 157 | 1 | 8 | 10 | 110 |
| 1786704565 | 157 | 1 | 8 | 11 | 110 |
| 1786703365 | 157 | 1 | 8 | 11 | 110 |
| 1786702165 | 157 | 1 | 8 | 11 | 110 |
| 1786700965 | 157 | 1 | 8 | 11 | 110 |
| 1786699765 | 157 | 1 | 8 | 10 | 110 |
| 1786698565 | 156 | 1 | 8 | 10 | 110 |
| 1786697365 | 157 | 1 | 8 | 10 | 110 |
| 1786696165 | 157 | 1 | 8 | 10 | 110 |
| 1786694965 | 157 | 1 | 8 | 11 | 110 |
| 1786693765 | 157 | 1 | 8 | 10 | 110 |
| 1786692565 | 157 | 1 | 8 | 11 | 110 |
| 1786691365 | 156 | 1 | 8 | 10 | 110 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)