APRS Track Direct

My position About ☰

reset

9A7KXP-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A7KXP-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	TX1h*	DgR*	Eff*	Temp*
1754163829	630 Pkt	110 Pkt	0.05 Pcnt	65 Pcnt	-64 'C
1754163229	650 Pkt	110 Pkt	0.04 Pcnt	65 Pcnt	-64 'C
1754162029	690 Pkt	120 Pkt	0.04 Pcnt	65 Pcnt	-64 'C
1754161489	700 Pkt	110 Pkt	0.04 Pcnt	65 Pcnt	-64 'C
1754160229	790 Pkt	170 Pkt	0.04 Pcnt	65 Pcnt	-64 'C
1754159749	820 Pkt	190 Pkt	0.04 Pcnt	65 Pcnt	-64 'C
1754158429	870 Pkt	220 Pkt	0.04 Pcnt	65 Pcnt	-64 'C
1754158009	890 Pkt	230 Pkt	0.04 Pcnt	65 Pcnt	-64 'C
1754156629	860 Pkt	230 Pkt	0.03 Pcnt	65 Pcnt	-64 'C
1754156270	850 Pkt	220 Pkt	0.03 Pcnt	65 Pcnt	-64 'C
1754154829	800 Pkt	240 Pkt	0.03 Pcnt	65 Pcnt	-64 'C
1754154530	790 Pkt	230 Pkt	0.03 Pcnt	65 Pcnt	-64 'C
1754153029	820 Pkt	230 Pkt	0.02 Pcnt	65 Pcnt	-64 'C
1754152790	810 Pkt	230 Pkt	0.02 Pcnt	65 Pcnt	-64 'C
1754151230	850 Pkt	230 Pkt	0.02 Pcnt	65 Pcnt	-64 'C
1754151050	860 Pkt	230 Pkt	0.02 Pcnt	65 Pcnt	-64 'C
1754149429	890 Pkt	220 Pkt	0.01 Pcnt	65 Pcnt	-64 'C
1754149310	890 Pkt	220 Pkt	0.01 Pcnt	65 Pcnt	-64 'C
1754147629	890 Pkt	200 Pkt	0.01 Pcnt	65 Pcnt	-64 'C
1754147570	890 Pkt	200 Pkt	0.01 Pcnt	65 Pcnt	-64 'C
1754145830	830 Pkt	190 Pkt	0 Pcnt	65 Pcnt	-64 'C
1754145829	830 Pkt	190 Pkt	0 Pcnt	65 Pcnt	-64 'C
1754144090	820 Pkt	180 Pkt	1.83 Pcnt	65 Pcnt	-64 'C
1754144029	830 Pkt	190 Pkt	1.83 Pcnt	65 Pcnt	-64 'C
1754142350	800 Pkt	200 Pkt	1.83 Pcnt	65 Pcnt	-64 'C

*Used Equation Coefficients:

Rx1h: 0, 10, 0

TX1h: 0, 10, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)