APRS Track Direct

My position About ☰

reset

WA6RSV-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WA6RSV-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1762288025	285 Pkts	274 Pkts	5 Pkts	19 C
1762284425	355 Pkts	335 Pkts	8 Pkts	19 C
1762280825	387 Pkts	374 Pkts	6 Pkts	19 C
1762277225	344 Pkts	335 Pkts	8 Pkts	19 C
1762273625	399 Pkts	388 Pkts	6 Pkts	19 C
1762270025	309 Pkts	300 Pkts	12 Pkts	18 C
1762266425	226 Pkts	219 Pkts	4 Pkts	19 C
1762259225	215 Pkts	205 Pkts	6 Pkts	19 C
1762255625	240 Pkts	230 Pkts	5 Pkts	19 C
1762252025	220 Pkts	214 Pkts	5 Pkts	18 C
1762248425	229 Pkts	222 Pkts	5 Pkts	17 C
1762244825	215 Pkts	209 Pkts	5 Pkts	17 C
1762241224	282 Pkts	271 Pkts	5 Pkts	18 C
1762237624	284 Pkts	273 Pkts	5 Pkts	19 C
1762234025	296 Pkts	288 Pkts	4 Pkts	19 C
1762230424	307 Pkts	298 Pkts	4 Pkts	19 C
1762226824	352 Pkts	341 Pkts	7 Pkts	20 C
1762223225	357 Pkts	348 Pkts	5 Pkts	19 C
1762219624	324 Pkts	318 Pkts	4 Pkts	19 C
1762216027	342 Pkts	335 Pkts	6 Pkts	19 C
1762212425	321 Pkts	311 Pkts	4 Pkts	19 C
1762208825	326 Pkts	312 Pkts	6 Pkts	19 C
1762205225	354 Pkts	316 Pkts	5 Pkts	19 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)