This is the latest recevied telemetry packets stored in our database for station/object SP3ZBY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770141529 | 184 Count | 242 Count | 177 Count | 4 VDC | 0 VDC |
| 1770139728 | 169 Count | 221 Count | 163 Count | 4 VDC | 0 VDC |
| 1770137927 | 155 Count | 197 Count | 150 Count | 3.99 VDC | 0 VDC |
| 1770136126 | 76 Count | 113 Count | 72 Count | 4 VDC | 0 VDC |
| 1770134325 | 48 Count | 72 Count | 45 Count | 3.99 VDC | 0 VDC |
| 1770132524 | 35 Count | 49 Count | 33 Count | 4 VDC | 0 VDC |
| 1770130723 | 22 Count | 26 Count | 21 Count | 4 VDC | 0 VDC |
| 1770127132 | 607 Count | 981 Count | 579 Count | 4 VDC | 0 VDC |
| 1770125331 | 594 Count | 962 Count | 567 Count | 4 VDC | 0 VDC |
| 1770123530 | 572 Count | 933 Count | 546 Count | 4 VDC | 0 VDC |
| 1770121729 | 552 Count | 903 Count | 527 Count | 4 VDC | 0 VDC |
| 1770119928 | 539 Count | 878 Count | 515 Count | 4 VDC | 0 VDC |
| 1770118127 | 524 Count | 857 Count | 501 Count | 4 VDC | 0 VDC |
| 1770116326 | 486 Count | 813 Count | 464 Count | 4 VDC | 0 VDC |
| 1770114525 | 473 Count | 781 Count | 452 Count | 4 VDC | 0 VDC |
| 1770112724 | 455 Count | 741 Count | 435 Count | 4 VDC | 0 VDC |
| 1770110924 | 434 Count | 694 Count | 415 Count | 4 VDC | 0 VDC |
| 1770109123 | 421 Count | 665 Count | 403 Count | 4 VDC | 0 VDC |
| 1770107322 | 393 Count | 626 Count | 376 Count | 4 VDC | 0 VDC |
| 1770105531 | 374 Count | 594 Count | 358 Count | 4 VDC | 0 VDC |
| 1770103730 | 360 Count | 569 Count | 345 Count | 4.01 VDC | 0 VDC |
| 1770101929 | 339 Count | 534 Count | 325 Count | 4 VDC | 0 VDC |
| 1770100129 | 320 Count | 503 Count | 307 Count | 4 VDC | 0 VDC |
| 1770098328 | 286 Count | 454 Count | 274 Count | 4 VDC | 0 VDC |
| 1770096527 | 230 Count | 389 Count | 219 Count | 4 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)