APRS Track Direct

My position About ☰

reset

OE9XVI-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE9XVI-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1790651769	12.15 Volt	890 Pkt	78 Pcnt	-64 °c
1790651469	12.15 Volt	880 Pkt	77 Pcnt	-64 °c
1790651169	12.15 Volt	880 Pkt	78 Pcnt	-64 °c
1790650869	11.93 Volt	860 Pkt	78 Pcnt	-64 °c
1790650569	12.15 Volt	860 Pkt	78 Pcnt	-64 °c
1790650269	12.15 Volt	860 Pkt	79 Pcnt	-64 °c
1790649969	12.15 Volt	860 Pkt	79 Pcnt	-64 °c
1790649669	12.15 Volt	860 Pkt	79 Pcnt	-64 °c
1790649369	12.15 Volt	840 Pkt	79 Pcnt	-64 °c
1790649069	12.15 Volt	820 Pkt	80 Pcnt	-64 °c
1790648769	12.15 Volt	830 Pkt	80 Pcnt	-64 °c
1790648469	12.15 Volt	830 Pkt	79 Pcnt	-64 °c
1790648169	11.78 Volt	820 Pkt	79 Pcnt	-64 °c
1790647869	12.15 Volt	800 Pkt	78 Pcnt	-64 °c
1790647569	12.15 Volt	810 Pkt	77 Pcnt	-64 °c
1790647269	12.15 Volt	820 Pkt	76 Pcnt	-64 °c
1790646969	12.15 Volt	840 Pkt	76 Pcnt	-64 °c
1790646669	12.15 Volt	840 Pkt	75 Pcnt	-64 °c
1790646369	12.15 Volt	850 Pkt	74 Pcnt	-64 °c
1790646069	12.15 Volt	870 Pkt	74 Pcnt	-64 °c
1790645769	12.15 Volt	890 Pkt	74 Pcnt	-64 °c
1790645469	12.15 Volt	900 Pkt	74 Pcnt	-64 °c
1790645169	12.15 Volt	890 Pkt	74 Pcnt	-64 °c
1790644869	12.15 Volt	890 Pkt	73 Pcnt	-64 °c
1790644569	12.15 Volt	890 Pkt	73 Pcnt	-64 °c

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)