This is the latest recevied telemetry packets stored in our database for station/object W2KGY-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | VBat* | VSolar* | VLight* | CPUTemp* | CPULoad* |
|---|---|---|---|---|---|
| 1762299217 | 0 | 0 | 9.4 | 40.8 | 0 |
| 1762297416 | 0 | 0 | 9.4 | 42.9 | 0.04 |
| 1762297200 | 0 | 0 | 9.4 | 42.9 | 0 |
| 1762297070 | 0 | 0 | 9.4 | 44 | 0.02 |
| 1762296488 | 0 | 0 | 9.4 | 44 | 1.06 |
| 1762295196 | 0 | 0 | 0 | 41.9 | 0 |
| 1762293394 | 0 | 0 | 0 | 41.9 | 0 |
| 1762291593 | 0 | 0 | 0 | 41.9 | 0 |
| 1762289793 | 0 | 0 | 0 | 41.3 | 0 |
| 1762287993 | 0 | 0 | 0 | 41.9 | 0 |
| 1762286191 | 0 | 0 | 0 | 41.9 | 0 |
| 1762284391 | 0 | 0 | 0 | 41.9 | 0 |
| 1762280789 | 0 | 0 | 0 | 41.9 | 0 |
| 1762278989 | 0 | 0 | 0 | 41.9 | 0 |
| 1762277188 | 0 | 0 | 0 | 42.4 | 0.05 |
| 1762276988 | 0 | 0 | 0 | 41.3 | 0 |
| 1762273387 | 0 | 0 | 0 | 41.9 | 0 |
| 1762271586 | 0 | 0 | 0 | 41.3 | 0 |
| 1762269786 | 0 | 0 | 0 | 43.5 | 0 |
| 1762267992 | 0 | 0 | 0 | 42.4 | 0 |
| 1762266191 | 0 | 0 | 0 | 42.9 | 0 |
| 1762264390 | 0 | 0 | 0 | 42.4 | 0 |
*Used Equation Coefficients:
VBat: 0, 1, 0
VSolar: 0, 1, 0
VLight: 0, 1, 0
CPUTemp: 0, 1, 0
CPULoad: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)