This is the latest recevied telemetry packets stored in our database for station/object 9M2IBR-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | RxTraffic* | TxTraffic* | DigiTraffic* |
|---|---|---|---|---|---|
| 1786736974 | 4 VDC | 5.24 VDC | 17 Pkt | 1 Pkt | 0 Pkt |
| 1786736374 | 4 VDC | 5.24 VDC | 7 Pkt | 1 Pkt | 0 Pkt |
| 1786735773 | 3.99 VDC | 5.18 VDC | 6 Pkt | 1 Pkt | 0 Pkt |
| 1786735173 | 4 VDC | 5.24 VDC | 9 Pkt | 1 Pkt | 0 Pkt |
| 1786734573 | 4 VDC | 5.22 VDC | 12 Pkt | 1 Pkt | 0 Pkt |
| 1786733972 | 3.99 VDC | 5.2 VDC | 16 Pkt | 1 Pkt | 0 Pkt |
| 1786733372 | 4 VDC | 5.22 VDC | 17 Pkt | 1 Pkt | 0 Pkt |
| 1786732772 | 3.99 VDC | 5.18 VDC | 20 Pkt | 1 Pkt | 0 Pkt |
| 1786732171 | 4 VDC | 5.24 VDC | 14 Pkt | 2 Pkt | 0 Pkt |
| 1786731571 | 4 VDC | 5.24 VDC | 18 Pkt | 1 Pkt | 0 Pkt |
| 1786730971 | 3.99 VDC | 5.24 VDC | 17 Pkt | 1 Pkt | 0 Pkt |
| 1786730370 | 4 VDC | 5.24 VDC | 13 Pkt | 2 Pkt | 0 Pkt |
| 1786729770 | 4 VDC | 5.24 VDC | 9 Pkt | 1 Pkt | 0 Pkt |
| 1786729170 | 3.99 VDC | 5.24 VDC | 19 Pkt | 1 Pkt | 0 Pkt |
| 1786728569 | 4 VDC | 5.22 VDC | 17 Pkt | 4 Pkt | 0 Pkt |
| 1786727969 | 4 VDC | 5.24 VDC | 7 Pkt | 1 Pkt | 0 Pkt |
| 1786727369 | 4 VDC | 5.24 VDC | 10 Pkt | 1 Pkt | 0 Pkt |
| 1786726768 | 4 VDC | 5.24 VDC | 9 Pkt | 1 Pkt | 0 Pkt |
| 1786726168 | 4 VDC | 5.24 VDC | 9 Pkt | 3 Pkt | 0 Pkt |
| 1786725568 | 4 VDC | 5.24 VDC | 8 Pkt | 1 Pkt | 0 Pkt |
| 1786724967 | 4 VDC | 5.24 VDC | 10 Pkt | 1 Pkt | 0 Pkt |
| 1786724367 | 4 VDC | 5.22 VDC | 10 Pkt | 1 Pkt | 0 Pkt |
| 1786723767 | 4 VDC | 5.24 VDC | 7 Pkt | 1 Pkt | 0 Pkt |
| 1786723166 | 4 VDC | 5.24 VDC | 10 Pkt | 1 Pkt | 0 Pkt |
| 1786722566 | 4 VDC | 5.24 VDC | 10 Pkt | 1 Pkt | 0 Pkt |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
DigiTraffic: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)