This is the latest recevied telemetry packets stored in our database for station/object HB9TJR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794904273 | 160 | 0 | 89 | 72 | 99 |
| 1794904258 | 160 | 0 | 89 | 72 | 99 |
| 1794903313 | 160 | 2 | 89 | 71 | 99 |
| 1794903298 | 160 | 2 | 89 | 73 | 99 |
| 1794902353 | 160 | 1 | 89 | 71 | 99 |
| 1794902338 | 160 | 2 | 89 | 73 | 99 |
| 1794901394 | 159 | 3 | 89 | 71 | 99 |
| 1794901378 | 160 | 3 | 89 | 73 | 99 |
| 1794900639 | 160 | 4 | 89 | 72 | 99 |
| 1794900433 | 160 | 4 | 89 | 72 | 99 |
| 1794900418 | 160 | 4 | 89 | 72 | 99 |
| 1794899718 | 160 | 4 | 89 | 73 | 99 |
| 1794899473 | 160 | 4 | 89 | 71 | 99 |
| 1794899458 | 160 | 4 | 89 | 73 | 99 |
| 1794898513 | 160 | 4 | 89 | 72 | 99 |
| 1794898498 | 160 | 4 | 89 | 72 | 99 |
| 1794897553 | 160 | 4 | 89 | 72 | 99 |
| 1794897538 | 160 | 4 | 89 | 72 | 100 |
| 1794896593 | 160 | 4 | 89 | 72 | 100 |
| 1794896578 | 160 | 4 | 89 | 72 | 100 |
| 1794895633 | 160 | 4 | 89 | 73 | 99 |
| 1794895618 | 160 | 4 | 89 | 72 | 99 |
| 1794894673 | 160 | 4 | 89 | 72 | 99 |
| 1794894658 | 160 | 4 | 89 | 72 | 99 |
| 1794893713 | 160 | 4 | 89 | 72 | 99 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)