This is the latest recevied telemetry packets stored in our database for station/object HS7ZSX-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1753794672 | 0 Pkt | 0 Pkt | 0 Pkt | -85 dBm | 0 % |
| 1753792864 | 0 Pkt | 0 Pkt | 0 Pkt | -84 dBm | 0 % |
| 1753790965 | 0 Pkt | 0 Pkt | 0 Pkt | -85 dBm | 0 % |
| 1753789150 | 0 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 0 % |
| 1753787335 | 0 Pkt | 0 Pkt | 0 Pkt | -82 dBm | 0 % |
| 1753785520 | 0 Pkt | 0 Pkt | 0 Pkt | -82 dBm | 0 % |
| 1753783705 | 0 Pkt | 0 Pkt | 0 Pkt | -82 dBm | 0 % |
| 1753781890 | 0 Pkt | 0 Pkt | 0 Pkt | -83 dBm | 0 % |
| 1753780076 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1753778260 | 0 Pkt | 0 Pkt | 0 Pkt | -84 dBm | 0 % |
| 1753776445 | 0 Pkt | 0 Pkt | 0 Pkt | -78 dBm | 0 % |
| 1753774634 | 0 Pkt | 0 Pkt | 0 Pkt | -85 dBm | 0 % |
| 1753772816 | 0 Pkt | 0 Pkt | 0 Pkt | -83 dBm | 0 % |
| 1753771001 | 0 Pkt | 0 Pkt | 0 Pkt | -86 dBm | 0 % |
| 1753769186 | 0 Pkt | 0 Pkt | 0 Pkt | -84 dBm | 0 % |
| 1753767371 | 0 Pkt | 0 Pkt | 0 Pkt | -85 dBm | 0 % |
| 1753765556 | 0 Pkt | 0 Pkt | 0 Pkt | -85 dBm | 0 % |
| 1753763741 | 0 Pkt | 0 Pkt | 0 Pkt | -84 dBm | 0 % |
| 1753761926 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1753760111 | 0 Pkt | 0 Pkt | 0 Pkt | -81 dBm | 0 % |
| 1753758296 | 0 Pkt | 0 Pkt | 0 Pkt | -80 dBm | 0 % |
| 1753756481 | 0 Pkt | 0 Pkt | 0 Pkt | -79 dBm | 0 % |
| 1753754666 | 0 Pkt | 0 Pkt | 0 Pkt | -77 dBm | 0 % |
| 1753752853 | 0 Pkt | 0 Pkt | 0 Pkt | -83 dBm | 0 % |
| 1753751037 | 0 Pkt | 0 Pkt | 0 Pkt | -82 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)