This is the latest recevied telemetry packets stored in our database for station/object DD0AO-01. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1779775607 | 1022.9 hPa | 26.6 C deg | 39 % | 1031.7 hPa | 0 C deg |
| 1779751299 | 1023.5 hPa | 24.6 C deg | 44.1 % | 1032.3 hPa | 0 C deg |
| 1779745855 | 1023.6 hPa | 26.3 C deg | 40.6 % | 1032.3 hPa | 0 C deg |
| 1779734971 | 1023 hPa | 26.4 C deg | 39.8 % | 1031.8 hPa | 0 C deg |
| 1779733147 | 1022.9 hPa | 26.5 C deg | 39.7 % | 1031.7 hPa | 0 C deg |
| 1779729526 | 1023.1 hPa | 26.5 C deg | 39.3 % | 1031.8 hPa | 0 C deg |
| 1779727709 | 1023.1 hPa | 26.6 C deg | 39 % | 1031.9 hPa | 0 C deg |
| 1779725878 | 1023.3 hPa | 26.6 C deg | 38.8 % | 1032.1 hPa | 0 C deg |
| 1779724061 | 1023.4 hPa | 26.6 C deg | 38.7 % | 1032.2 hPa | 0 C deg |
| 1779722255 | 1023.6 hPa | 26.7 C deg | 38.5 % | 1032.4 hPa | 0 C deg |
| 1779716799 | 1024.3 hPa | 26.6 C deg | 38.3 % | 1033 hPa | 0 C deg |
| 1779714984 | 1024.4 hPa | 26.7 C deg | 38.2 % | 1033.2 hPa | 0 C deg |
| 1779713168 | 1024.7 hPa | 26.6 C deg | 38 % | 1033.5 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)