APRS Track Direct

My position About ☰

reset

KR2C-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KR2C-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1758174837	0.08 Rx Erlang	0.02 Tx Erlang	66 count/10m	11 count/10m	15 count/10m
1758173637	0.08 Rx Erlang	0.02 Tx Erlang	64 count/10m	6 count/10m	13 count/10m
1758172437	0.08 Rx Erlang	0.02 Tx Erlang	64 count/10m	11 count/10m	17 count/10m
1758171237	0.08 Rx Erlang	0.02 Tx Erlang	68 count/10m	5 count/10m	15 count/10m
1758170037	0.09 Rx Erlang	0.03 Tx Erlang	70 count/10m	8 count/10m	17 count/10m
1758168837	0.08 Rx Erlang	0.03 Tx Erlang	61 count/10m	10 count/10m	17 count/10m
1758167637	0.08 Rx Erlang	0.02 Tx Erlang	66 count/10m	2 count/10m	15 count/10m
1758166437	0.1 Rx Erlang	0.02 Tx Erlang	72 count/10m	8 count/10m	19 count/10m
1758165237	0.1 Rx Erlang	0.11 Tx Erlang	68 count/10m	18 count/10m	51 count/10m
1758164037	0.07 Rx Erlang	0.02 Tx Erlang	55 count/10m	5 count/10m	12 count/10m
1758162837	0.07 Rx Erlang	0.02 Tx Erlang	59 count/10m	5 count/10m	15 count/10m
1758161637	0.09 Rx Erlang	0.02 Tx Erlang	74 count/10m	9 count/10m	13 count/10m
1758160437	0.1 Rx Erlang	0.03 Tx Erlang	82 count/10m	18 count/10m	16 count/10m
1758159237	0.09 Rx Erlang	0.02 Tx Erlang	73 count/10m	19 count/10m	17 count/10m
1758158037	0.08 Rx Erlang	0.03 Tx Erlang	66 count/10m	13 count/10m	19 count/10m
1758156837	0.09 Rx Erlang	0.03 Tx Erlang	61 count/10m	19 count/10m	22 count/10m
1758155637	0.11 Rx Erlang	0.07 Tx Erlang	86 count/10m	34 count/10m	46 count/10m
1758154437	0.11 Rx Erlang	0.03 Tx Erlang	81 count/10m	21 count/10m	23 count/10m
1758153237	0.09 Rx Erlang	0.02 Tx Erlang	79 count/10m	3 count/10m	15 count/10m
1758152038	0.1 Rx Erlang	0.02 Tx Erlang	85 count/10m	9 count/10m	13 count/10m
1758150837	0.09 Rx Erlang	0.02 Tx Erlang	79 count/10m	11 count/10m	12 count/10m
1758149637	0.09 Rx Erlang	0.02 Tx Erlang	83 count/10m	22 count/10m	20 count/10m
1758148437	0.1 Rx Erlang	0.05 Tx Erlang	78 count/10m	20 count/10m	26 count/10m
1758147237	0.11 Rx Erlang	0.08 Tx Erlang	73 count/10m	29 count/10m	42 count/10m
1758146037	0.1 Rx Erlang	0.02 Tx Erlang	87 count/10m	11 count/10m	14 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)