APRS Track Direct

My position About ☰

reset

KK5CM-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KK5CM-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Room*
1836274615	13.43 Volt	460 Pkt	70 Pkt	81 Pcnt	28.5 C
1836274609	13.43 Volt	460 Pkt	70 Pkt	81 Pcnt	28.5 C
1836274460	13.43 Volt	450 Pkt	80 Pkt	80 Pcnt	28.5 C
1836274459	13.43 Volt	450 Pkt	80 Pkt	80 Pcnt	28.5 C
1836274309	13.43 Volt	470 Pkt	80 Pkt	81 Pcnt	28.5 C
1836274159	13.43 Volt	470 Pkt	80 Pkt	81 Pcnt	28.5 C
1836274010	13.43 Volt	470 Pkt	70 Pkt	83 Pcnt	28.5 C
1836274009	13.43 Volt	470 Pkt	70 Pkt	83 Pcnt	28.5 C
1766272550	13.58 Volt	290 Pkt	60 Pkt	84 Pcnt	24 C
1766272250	13.58 Volt	280 Pkt	60 Pkt	84 Pcnt	23.5 C
1766272250	13.58 Volt	280 Pkt	60 Pkt	84 Pcnt	23.5 C
1766271950	13.58 Volt	270 Pkt	50 Pkt	83 Pcnt	23.5 C
1766271652	13.58 Volt	260 Pkt	50 Pkt	83 Pcnt	22.5 C
1766271650	13.58 Volt	260 Pkt	50 Pkt	83 Pcnt	22.5 C
1766271350	13.58 Volt	270 Pkt	50 Pkt	83 Pcnt	22.5 C
1766271051	13.58 Volt	260 Pkt	50 Pkt	82 Pcnt	23.5 C
1766271050	13.58 Volt	260 Pkt	50 Pkt	82 Pcnt	23.5 C
1766270750	13.58 Volt	270 Pkt	50 Pkt	83 Pcnt	24.5 C
1766270458	13.58 Volt	250 Pkt	50 Pkt	82 Pcnt	24 C
1766270450	13.58 Volt	250 Pkt	50 Pkt	82 Pcnt	24 C
1766270151	13.58 Volt	260 Pkt	50 Pkt	81 Pcnt	24 C
1766269850	13.58 Volt	280 Pkt	50 Pkt	83 Pcnt	23 C
1766269550	13.58 Volt	290 Pkt	50 Pkt	83 Pcnt	22 C
1766269252	13.58 Volt	300 Pkt	60 Pkt	82 Pcnt	23 C
1766269250	13.58 Volt	300 Pkt	60 Pkt	82 Pcnt	23 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Room: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)