APRS Track Direct

My position About ☰

reset

LU2DXW-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU2DXW-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1758222059	18 Pkt	0 Pkt	-60 dBm	13.64 V
1758220835	15 Pkt	1 Pkt	-57 dBm	13.64 V
1758219610	15 Pkt	1 Pkt	-58 dBm	13.64 V
1758218387	15 Pkt	0 Pkt	-60 dBm	13.64 V
1758217163	10 Pkt	1 Pkt	-59 dBm	13.64 V
1758214717	10 Pkt	2 Pkt	-58 dBm	13.64 V
1758213495	24 Pkt	1 Pkt	-57 dBm	13.64 V
1758212270	9 Pkt	0 Pkt	-60 dBm	13.64 V
1758211048	8 Pkt	0 Pkt	-56 dBm	13.64 V
1758209824	21 Pkt	0 Pkt	-59 dBm	13.64 V
1758207378	19 Pkt	0 Pkt	-59 dBm	13.64 V
1758206154	17 Pkt	0 Pkt	-59 dBm	13.64 V
1758204930	15 Pkt	0 Pkt	-58 dBm	13.64 V
1758203708	31 Pkt	0 Pkt	-60 dBm	13.64 V
1758201258	46 Pkt	0 Pkt	-60 dBm	13.64 V
1758200029	37 Pkt	0 Pkt	-59 dBm	13.64 V
1758198804	23 Pkt	0 Pkt	-58 dBm	13.64 V
1758197580	16 Pkt	0 Pkt	-57 dBm	13.64 V
1758197244	11 Pkt	0 Pkt	-57 dBm	13.64 V
1758195131	25 Pkt	0 Pkt	-59 dBm	13.64 V
1758193906	21 Pkt	0 Pkt	-58 dBm	13.64 V
1758192683	36 Pkt	0 Pkt	-59 dBm	13.64 V
1758191457	31 Pkt	0 Pkt	-58 dBm	13.64 V
1758190231	15 Pkt	0 Pkt	-58 dBm	13.64 V
1758189007	19 Pkt	0 Pkt	-57 dBm	13.64 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)