This is the latest recevied telemetry packets stored in our database for station/object DL8MWL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732307474 | 2.9 deg C | 86.9 % | 1003.1 hPa | 0 | 0 |
| 1732306574 | 3.2 deg C | 87.3 % | 1002.4 hPa | 0 | 0 |
| 1732305674 | 3.4 deg C | 87.8 % | 1001.9 hPa | 0 | 0 |
| 1732304774 | 3.6 deg C | 86.2 % | 1001.4 hPa | 0 | 0 |
| 1732303874 | 3.6 deg C | 85.1 % | 1000.9 hPa | 0 | 0 |
| 1732302974 | 3.8 deg C | 84.4 % | 1000.3 hPa | 0 | 0 |
| 1732302074 | 3.7 deg C | 84.7 % | 999.9 hPa | 0 | 0 |
| 1732301742 | 3.7 deg C | 84.8 % | 999.8 hPa | 0 | 0 |
| 1732300842 | 3.8 deg C | 84.1 % | 999.4 hPa | 0 | 0 |
| 1732299942 | 3.8 deg C | 83.9 % | 999.3 hPa | 0 | 0 |
| 1732299042 | 4 deg C | 83.1 % | 999.1 hPa | 0 | 0 |
| 1732298142 | 4.2 deg C | 81.1 % | 998.8 hPa | 0 | 0 |
| 1732297242 | 4.3 deg C | 80.3 % | 998.5 hPa | 0 | 0 |
| 1732296341 | 4.6 deg C | 79.5 % | 998.3 hPa | 0 | 0 |
| 1732295441 | 4.5 deg C | 78.8 % | 998.1 hPa | 0 | 0 |
| 1732294541 | 4.5 deg C | 77.9 % | 997.9 hPa | 0 | 0 |
| 1732293641 | 4.5 deg C | 77.9 % | 997.9 hPa | 0 | 0 |
| 1732292741 | 4.4 deg C | 78.8 % | 997.9 hPa | 0 | 0 |
| 1732291841 | 4.4 deg C | 78.9 % | 997.8 hPa | 0 | 0 |
| 1732290941 | 4.4 deg C | 78.6 % | 997.7 hPa | 0 | 0 |
| 1732290041 | 4.5 deg C | 77.6 % | 997.6 hPa | 0 | 0 |
| 1732289708 | 4.6 deg C | 76.7 % | 997.5 hPa | 0 | 0 |
| 1732288807 | 4.6 deg C | 75.8 % | 997.4 hPa | 0 | 0 |
| 1732287907 | 4.5 deg C | 76.4 % | 997.3 hPa | 0 | 0 |
| 1732287007 | 4.5 deg C | 76.7 % | 997.2 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)