This is the latest recevied telemetry packets stored in our database for station/object F6KDU-16. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766282662 | 4.34 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1766280864 | 4.35 VDC | 1.58 VDC | 0 | 0 | 0 |
| 1766279064 | 4.38 VDC | 1.7 VDC | 0 | 0 | 0 |
| 1766277264 | 4.35 VDC | 1.7 VDC | 0 | 0 | 0 |
| 1766275464 | 4.34 VDC | 1.86 VDC | 0 | 0 | 0 |
| 1766273663 | 4.36 VDC | 1.64 VDC | 0 | 0 | 0 |
| 1766271863 | 4.35 VDC | 1.96 VDC | 0 | 0 | 0 |
| 1766270063 | 4.36 VDC | 2 VDC | 0 | 0 | 0 |
| 1766268263 | 4.37 VDC | 1.92 VDC | 0 | 0 | 0 |
| 1766266463 | 4.38 VDC | 2.22 VDC | 0 | 0 | 0 |
| 1766264662 | 4.38 VDC | 1.96 VDC | 0 | 0 | 0 |
| 1766262862 | 4.38 VDC | 1.94 VDC | 0 | 0 | 0 |
| 1766261061 | 4.38 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1766259264 | 4.36 VDC | 2.14 VDC | 0 | 0 | 0 |
| 1766257464 | 4.35 VDC | 2.1 VDC | 0 | 0 | 0 |
| 1766255664 | 4.35 VDC | 2.06 VDC | 0 | 0 | 0 |
| 1766253863 | 4.38 VDC | 2.14 VDC | 0 | 0 | 0 |
| 1766252063 | 4.36 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1766250263 | 4.36 VDC | 2.16 VDC | 0 | 0 | 0 |
| 1766248463 | 4.36 VDC | 2.18 VDC | 0 | 0 | 0 |
| 1766246662 | 4.35 VDC | 2.22 VDC | 0 | 0 | 0 |
| 1766244862 | 4.37 VDC | 2.16 VDC | 0 | 0 | 0 |
| 1766243062 | 4.37 VDC | 2.14 VDC | 0 | 0 | 0 |
| 1766241262 | 4.38 VDC | 2.28 VDC | 0 | 0 | 0 |
| 1766239460 | 4.37 VDC | 0.78 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)