This is the latest recevied telemetry packets stored in our database for station/object SOMTNP. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782532309 | 4.17 VDC | 1.44 VDC | 0 | 0 | 0 |
| 1782531708 | 4.18 VDC | 1.44 VDC | 0 | 0 | 0 |
| 1782531108 | 4.18 VDC | 1.46 VDC | 0 | 0 | 0 |
| 1782530508 | 4.18 VDC | 1.52 VDC | 0 | 0 | 0 |
| 1782529908 | 4.18 VDC | 2 VDC | 0 | 0 | 0 |
| 1782529308 | 4.18 VDC | 4.38 VDC | 0 | 0 | 0 |
| 1782528707 | 4.18 VDC | 4.36 VDC | 0 | 0 | 0 |
| 1782528107 | 4.18 VDC | 5.1 VDC | 0 | 0 | 0 |
| 1782527507 | 4.18 VDC | 11.4 VDC | 0 | 0 | 0 |
| 1782526897 | 4.18 VDC | 13.38 VDC | 0 | 0 | 0 |
| 1782526296 | 4.18 VDC | 14.46 VDC | 0 | 0 | 0 |
| 1782525696 | 4.18 VDC | 15.06 VDC | 0 | 0 | 0 |
| 1782525096 | 4.19 VDC | 15.46 VDC | 0 | 0 | 0 |
| 1782524496 | 4.19 VDC | 15.82 VDC | 0 | 0 | 0 |
| 1782523896 | 4.19 VDC | 16.12 VDC | 0 | 0 | 0 |
| 1782523295 | 4.19 VDC | 16.2 VDC | 0 | 0 | 0 |
| 1782522696 | 4.19 VDC | 16.64 VDC | 0 | 0 | 0 |
| 1782522095 | 4.19 VDC | 16.82 VDC | 0 | 0 | 0 |
| 1782521495 | 4.19 VDC | 17.2 VDC | 0 | 0 | 0 |
| 1782520895 | 4.19 VDC | 17.62 VDC | 0 | 0 | 0 |
| 1782520294 | 4.19 VDC | 18.06 VDC | 0 | 0 | 0 |
| 1782519694 | 4.19 VDC | 18.34 VDC | 0 | 0 | 0 |
| 1782519094 | 4.2 VDC | 18.5 VDC | 0 | 0 | 0 |
| 1782518494 | 4.19 VDC | 18.74 VDC | 0 | 0 | 0 |
| 1782517893 | 4.19 VDC | 19.06 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)