APRS Track Direct

My position About ☰

reset

DB0HRC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0HRC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1791754240	0.03 Rx Erlang	0 Tx Erlang	24 count/10m	0 count/10m	0 count/10m
1791753040	0.04 Rx Erlang	0 Tx Erlang	33 count/10m	3 count/10m	0 count/10m
1791751840	0.03 Rx Erlang	0 Tx Erlang	25 count/10m	0 count/10m	0 count/10m
1791750640	0.02 Rx Erlang	0 Tx Erlang	22 count/10m	1 count/10m	0 count/10m
1791749440	0.03 Rx Erlang	0 Tx Erlang	30 count/10m	0 count/10m	0 count/10m
1791748240	0.03 Rx Erlang	0 Tx Erlang	25 count/10m	0 count/10m	0 count/10m
1791747040	0.03 Rx Erlang	0 Tx Erlang	26 count/10m	0 count/10m	0 count/10m
1791745840	0.04 Rx Erlang	0 Tx Erlang	35 count/10m	3 count/10m	0 count/10m
1791744650	0.03 Rx Erlang	0 Tx Erlang	26 count/10m	0 count/10m	0 count/10m
1791743440	0.03 Rx Erlang	0 Tx Erlang	29 count/10m	3 count/10m	0 count/10m
1791742240	0.06 Rx Erlang	0 Tx Erlang	45 count/10m	8 count/10m	0 count/10m
1791741040	0.03 Rx Erlang	0 Tx Erlang	27 count/10m	0 count/10m	0 count/10m
1791739840	0.03 Rx Erlang	0 Tx Erlang	23 count/10m	0 count/10m	0 count/10m
1791738640	0.04 Rx Erlang	0 Tx Erlang	33 count/10m	5 count/10m	0 count/10m
1791737440	0.03 Rx Erlang	0 Tx Erlang	27 count/10m	0 count/10m	0 count/10m
1791736240	0.03 Rx Erlang	0 Tx Erlang	25 count/10m	3 count/10m	0 count/10m
1791735040	0.04 Rx Erlang	0 Tx Erlang	34 count/10m	5 count/10m	0 count/10m
1791733840	0.03 Rx Erlang	0 Tx Erlang	27 count/10m	0 count/10m	0 count/10m
1791732640	0.03 Rx Erlang	0 Tx Erlang	33 count/10m	0 count/10m	0 count/10m
1791731440	0.06 Rx Erlang	0 Tx Erlang	41 count/10m	6 count/10m	0 count/10m
1791730240	0.04 Rx Erlang	0 Tx Erlang	31 count/10m	4 count/10m	0 count/10m
1791729040	0.03 Rx Erlang	0 Tx Erlang	28 count/10m	1 count/10m	0 count/10m
1791727840	0.04 Rx Erlang	0 Tx Erlang	34 count/10m	2 count/10m	0 count/10m
1791726640	0.04 Rx Erlang	0 Tx Erlang	29 count/10m	3 count/10m	0 count/10m
1791725440	0.02 Rx Erlang	0 Tx Erlang	22 count/10m	0 count/10m	0 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)