This is the latest recevied telemetry packets stored in our database for station/object N7UV-93. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1778041172 | 3.98 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1778040272 | 3.98 VDC | 12.6 VDC | 0 | 0 | 0 |
| 1778039372 | 3.98 VDC | 12.62 VDC | 0 | 0 | 0 |
| 1778038471 | 3.98 VDC | 12.64 VDC | 0 | 0 | 0 |
| 1778037570 | 3.98 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1778036670 | 3.97 VDC | 12.66 VDC | 0 | 0 | 0 |
| 1778035770 | 3.98 VDC | 12.62 VDC | 0 | 0 | 0 |
| 1778034870 | 3.98 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1778033969 | 3.98 VDC | 12.66 VDC | 0 | 0 | 0 |
| 1778033069 | 3.98 VDC | 12.64 VDC | 0 | 0 | 0 |
| 1778032169 | 3.98 VDC | 12.58 VDC | 0 | 0 | 0 |
| 1778031269 | 3.99 VDC | 12.56 VDC | 0 | 0 | 0 |
| 1778030368 | 3.98 VDC | 12.58 VDC | 0 | 0 | 0 |
| 1778029468 | 3.98 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1778028567 | 3.98 VDC | 12.64 VDC | 0 | 0 | 0 |
| 1778027667 | 3.98 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1778026767 | 3.98 VDC | 12.66 VDC | 0 | 0 | 0 |
| 1778025866 | 3.97 VDC | 12.6 VDC | 0 | 0 | 0 |
| 1778024966 | 3.99 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1778024066 | 3.98 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1778023166 | 3.98 VDC | 12.64 VDC | 0 | 0 | 0 |
| 1778022265 | 3.98 VDC | 12.66 VDC | 0 | 0 | 0 |
| 1778021365 | 3.98 VDC | 12.62 VDC | 0 | 0 | 0 |
| 1778020465 | 4 VDC | 12.62 VDC | 0 | 0 | 0 |
| 1778019565 | 3.98 VDC | 12.66 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)