APRS Track Direct

My position About ☰

reset

TB5CPW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TB5CPW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1770144186	16 Pkt	2 Pkt	-85 dBm	13.82 V
1770143540	20 Pkt	3 Pkt	-84 dBm	13.82 V
1770142909	16 Pkt	4 Pkt	-86 dBm	13.82 V
1770142279	17 Pkt	4 Pkt	-85 dBm	13.82 V
1770141651	21 Pkt	0 Pkt	-87 dBm	13.82 V
1770141025	57 Pkt	2 Pkt	-86 dBm	13.84 V
1770140393	54 Pkt	11 Pkt	-86 dBm	13.82 V
1770139752	39 Pkt	3 Pkt	-87 dBm	13.82 V
1770139118	20 Pkt	3 Pkt	-87 dBm	13.84 V
1770138490	30 Pkt	1 Pkt	-87 dBm	13.82 V
1770137862	37 Pkt	5 Pkt	-88 dBm	13.82 V
1770137232	30 Pkt	4 Pkt	-88 dBm	13.84 V
1770136602	60 Pkt	3 Pkt	-88 dBm	13.82 V
1770135969	26 Pkt	2 Pkt	-87 dBm	13.84 V
1770135340	33 Pkt	3 Pkt	-87 dBm	13.84 V
1770134710	18 Pkt	2 Pkt	-86 dBm	13.84 V
1770134081	37 Pkt	1 Pkt	-87 dBm	13.84 V
1770133450	24 Pkt	0 Pkt	-86 dBm	13.82 V
1770132823	21 Pkt	1 Pkt	-86 dBm	13.82 V
1770132196	33 Pkt	1 Pkt	-86 dBm	13.84 V
1770131581	31 Pkt	0 Pkt	-86 dBm	13.82 V
1770130939	27 Pkt	6 Pkt	-86 dBm	13.82 V
1770130311	26 Pkt	6 Pkt	-87 dBm	13.82 V
1770129675	16 Pkt	1 Pkt	-87 dBm	13.82 V
1770129049	25 Pkt	0 Pkt	-85 dBm	13.84 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)